|
|
Joined: Jan 2013
Posts: 522 Likes: 1
Member
|
Member
Joined: Jan 2013
Posts: 522 Likes: 1 |
I have gotten stuck with a DK 40i that is acting up.
I was asked to add a new station to it which should have been straight forward, but wasn’t.
While I was getting ready to punch down the new cross-connect it lost all power. Turns out the power strip it was plugged into went bad. So I moved its power plug to an available outlet and the AC power light turned on. The DC light blinked on and the went. Troubleshooting showed the KSTU2 card was cause the DC to go off, I removed it and the unit powered back up fully.
I have a refurbished KSTU2 on the way, but now the digital phone are not picking up an incoming call automatically when the handset is picked up like it was before.
The are also complaining the the VM isn’t working when the dial the 877-xxx-xxx number which only says they can’t reach that number at this time. I have a feeling this is an external VM issue.
The DK 40i only has 5 digital stations in use and 1 cordless phone which is connected to one of the ports on the KSTU2.
Any ideas of where I should look?
Patrick T. Caezza Santa Paula, CA 93060 C-7 - Low Voltage System Contractor - Lic# 992448
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2005
Posts: 2,716 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,716 Likes: 7 |
I am making a few guesses but perhaps the voicemail was connected to the KSTU card. Maybe there was an auto attendant that was answering first.
|
|
|
|
Joined: Jan 2013
Posts: 522 Likes: 1
Member
|
Member
Joined: Jan 2013
Posts: 522 Likes: 1 |
Thanks for the reply, David.
The VM issue is separate from the DK 40i and is supplied by Granite.
What might have happened is that when it lost power, the onboard battery was dead, and it lost all of its configuration.
Currently, all incoming calls only ring on the 00 station port. Calls can be picked up on any phone.
After lifting the handset they must select the ringing line. It does not do it automatically.
That is the only outward indication that I have seen so far.
I have most of the manuals, just wish I could find a copy of the DK Admin software.
Patrick T. Caezza Santa Paula, CA 93060 C-7 - Low Voltage System Contractor - Lic# 992448
|
|
|
|
Joined: Aug 2002
Posts: 4,929 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,929 Likes: 1 |
Up until Helene I had a DK40 programming doc that all my techs would use and we would modify for some but not often. But having 6ft of water in the house toasted all my drives and older laptops. Lost all my old softwares as well. Sorry
|
|
|
|
Joined: Jan 2013
Posts: 522 Likes: 1
Member
|
Member
Joined: Jan 2013
Posts: 522 Likes: 1 |
No worries and thanks for replying.
Patrick T. Caezza Santa Paula, CA 93060 C-7 - Low Voltage System Contractor - Lic# 992448
|
|
|
Forums84
Topics94,418
Posts639,448
Members49,817
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
376
guests, and
20
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|