|
|
|
|
Joined: Oct 2009
Posts: 18
Member
|
|
Member
Joined: Oct 2009
Posts: 18 |
RCA:
the phones did not work directly from the station port-
MVSpeed:
roll a pair from where?
cmarin
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2009
Posts: 18
Member
|
|
Member
Joined: Oct 2009
Posts: 18 |
Here is what I have done today:
I rewired the digital set it turns out I had one of the wires crossed- I corrected that and the phone works-
the other two: wiring is correct- since it only works on the blue pair on cat5 4 and 5 are the same on 568a and 568b- nothing to change there..... I reset the card- took it out for a minute- no change- any other ideas?
cmarin
|
|
|
|
|
Joined: Apr 2002
Posts: 144
Member
|
|
Member
Joined: Apr 2002
Posts: 144 |
Check them at the frame with a butt set or a home made jack and wire with alligator clips and a known working analog set. (Hopefully it's a 66 type block) If no dial tone, swap cards with another like card if you have one.
If it ain't broke, don't fix it!
|
|
|
|
|
Joined: Oct 2009
Posts: 18
Member
|
|
Member
Joined: Oct 2009
Posts: 18 |
And the analog phones were bad! dont know why they were just not working anymore! replaced them, all working now thanks!
cmarin
|
|
|
|
Forums84
Topics94,429
Posts639,506
Members49,821
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
202
guests, and
76
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
