web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Nov 2014
Posts: 16
boneash Offline OP
Member
OP Offline
Member
Joined: Nov 2014
Posts: 16
Hi guys,

I have a small problem encountered on the Officeserv 500, was wondering if anybody had encountered such a problem and could help me out. ponder

I have an officeserv 500 installed and the ringing to analog extensions is working fine with 16SLI Cards, however when i install 16MWSLI Cards, the extensions do not have ringing.

The card works fine otherwise, i can call from and receive calls to the 16MWSLI extensions.

Anybody has any idea how to get the extensions installed in the 16MWSLI Card to ring?




Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Is the 16mwsli in the same cabinet as the 16sli?

If you swap the 16sli for a 16mwsli does it work?


Joined: Nov 2014
Posts: 16
boneash Offline OP
Member
OP Offline
Member
Joined: Nov 2014
Posts: 16
Yup, the 16mwsli is in the same cabinet as the 16sli.

If i swap the cards, the same thing happens. The slot with the 16mwsli does not have ringing while the 16sli has ringing.

I thought it was a problem with the 16mwsli card, but every 16mwsli card seems to have the same problem. "tested with 6 16mwsli cards"


Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
What's the part code on the barcode sticker on the card?

Specifically the part after the /

From memory it will be something like kp50016m/xsa

Compare that to what's on the 16sli kp50016s/xsa

Joined: Nov 2014
Posts: 16
boneash Offline OP
Member
OP Offline
Member
Joined: Nov 2014
Posts: 16
The part numbers for the cards are as follows:

16SLI : KP 500db 16S/ EUS Works perfectly

16MWSLI: KP 500db 16M/ AUA Everything works, except for the ringing



Joined: Sep 2001
Posts: 2,330
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,330
Likes: 7
boneash what country are you in?

Joined: Nov 2014
Posts: 16
boneash Offline OP
Member
OP Offline
Member
Joined: Nov 2014
Posts: 16
the selected country is Australia in MMC 812

Joined: Jun 2005
Posts: 574
Member
Offline
Member
Joined: Jun 2005
Posts: 574
You tried new power units
or pulling out the old 16li card to see if the phones ring

Joined: Sep 2001
Posts: 2,330
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,330
Likes: 7
So I know that some countries had ring generator cards in the cabinets instead of the ring voltage being done on the card.Which way is the ring voltage generated on the cards or in the cabinet?

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
The australian cards on the 500 take a ring generator unit (rgu) installed on the back of the cabinet behind the psu's.

The 16sli cards you have are european, the 16mwsli cards are australian.

What is the jumper behind the 1st psu set to? Int or ext?

You'll have to find a rgu, fit it and change the jumper to ext before the 16mwsli cards will work.

Australia has a sine wave ring signal, other countries have a square wave. The rgu generates the sine wave ring required.


What are the dip switch settings on the mcp? With the exception of 6, 7 and 8 only switch 3 should be on for australia.

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,284
Posts638,771
Members49,765
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,459 Shoretel
188,319 CTX100 install
187,092 1a2 system
Newest Members
Nadisale, andreww, gohunt, Darrick, telecopippo
49,764 Registered Users
Top Posters(30 Days)
Toner 23
teleco 5
jc2it 4
dans 3
Who's Online Now
2 members (Carl Navarro, nortelvoip), 99 guests, and 350 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5