|
|
|
|
Joined: Dec 2008
Posts: 17
Member
|
|
Member
Joined: Dec 2008
Posts: 17 |
Hi all,
Carrier email me the cut sheet for PRI and
they are going to send 10 digit DID.
304 Incoming Line Group Assignment
11 DID Digits
I can only select 0-7.
Can I receive 10 digits DID or I have to call Carrier to change it.
thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2002
Posts: 4,305 Likes: 8
Moderator-Avaya, Polycom
|
|
Moderator-Avaya, Polycom
Joined: May 2002
Posts: 4,305 Likes: 8 |
Change it , never saw a carrier send 10 or 11 digits. You sure there did's and not pots. Who's the carrier?
Last edited by hitechcomm; 05/12/16 06:00 PM.
|
|
|
|
|
Joined: Dec 2008
Posts: 17
Member
|
|
Member
Joined: Dec 2008
Posts: 17 |
Thanks
Timewaner
Also they email me below
central office emulation - NI2
signaling - isdn pri
D chennel is DSO24, 64kbps
coding/framing b8zs/esf
quick question.
what do I select
pgm302-02 protocol
pgm302-05 trunk id type
pgm302-07 d ch position.
thanks
|
|
|
|
|
Joined: Dec 2008
Posts: 17
Member
|
|
Member
Joined: Dec 2008
Posts: 17 |
Thanks
Timewaner
Also Timewaner email me below
central office emulation - NI2
signaling - isdn pri
D chennel is DSO24, 64kbps
coding/framing b8zs/esf
quick question.
Does my choice is right for setting
pgm302-02 protocol -Nat's ISDN
pgm302-05 trunk id type -Implicit
pgm302-07 d ch position.- 24
302-08 bearer Svc-speech (checked)
302-09 bearer Svc-3.1khz auido (checked)
302-11 bearer Svc unrestr 64K (checked)
thank you for helping me out....
|
|
|
|
|
Joined: Feb 2007
Posts: 1,314
Member
|
|
Member
Joined: Feb 2007
Posts: 1,314 |
I ran into this same issue once and I believe is was with TW as well. Customer was switching providers, had the system programmed for 4 digit DID's and the new provider said they could only send 10 digits. I left the system just the way it was, plugged in the new circuit and everything worked just fine.
|
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
|
Member
Joined: May 2009
Posts: 1,198 |
Change it , never saw a carrier send 10 or 11 digits. You sure there did's and not pots. Who's the carrier? 10-digit DIDs are becoming more common, especially with SIP trunks. I have DIDs with multiple area codes and toll-free numbers being delivered on the same circuits, all 10-digit.
|
|
|
|
|
Joined: Feb 2012
Posts: 8
Member
|
|
Member
Joined: Feb 2012
Posts: 8 |
From my understanding......
They can send what they like.
304 says what do YOU want to look at. How many at the end?
If you have 200 number indial XXXXXXX100 > XXXXXXX299 you need to look for at least three digits so you can determine if it is say XX123 or XX223.
If you have just two indials XXXXX46872 and XXXXX56872 you would need to look for at least five digits to tell if the fifth digit was a 4 or 5.
|
|
|
|
Forums84
Topics94,428
Posts639,501
Members49,821
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
295
guests, and
67
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
