|
|
|
|
Joined: May 2008
Posts: 523
Member
|
|
Member
Joined: May 2008
Posts: 523 |
I have a couple/three applications where I need to put in some remote single line phones and a fax port.
I have fiber only to a remote building and will need to do IP for transport to an SLA.
Are there any recommended generic units that can go from a single line port to IP and back to a remote single line port for an analog cordless phone or fax machine?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
Grandstream i used 2 of these (4 ports) a while ago without a problem.
|
|
|
|
|
Joined: May 2008
Posts: 523
Member
|
|
Member
Joined: May 2008
Posts: 523 |
One on each side?
Do they make them just (1) port or could I have a gateway on one end with like (8)-ports and put individual single units in separate locations?
Do you sell them?
|
|
|
|
|
Joined: Jan 2007
Posts: 1,021
Member
|
|
Member
Joined: Jan 2007
Posts: 1,021 |
If he doesn't Teledynamics out of Texas or Target out of Maryland should.
John 807
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Linksys (now cisco) spa122 for a 2 port unit, Or spa8000 for an 8 port.
|
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
I meant I used 2 of them for separate locations... Faxes, cordless and such. You set each port up as a sip extension off the system and no we don't sell them but voipsupply does. The linksys that nameless said are also good and I think they come with fxo ports on them as well as fxs.
|
|
|
|
|
Joined: May 2008
Posts: 523
Member
|
|
Member
Joined: May 2008
Posts: 523 |
Yeah, I don't want SIP I don't think. Just FXO one the OfficeServ side and FXS on the remote side...
Unless a SIP license is cheaper and then I can just use one single port remote device.
Do they make one like that? OfficeServ side is just an IP port or SIP port and you just need one remote unit with an FXS jack?
|
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
Ok now i see what your saying you want to extend analog over the fiber but not through the phone system. If this is correct then you are correct to setup a FXO on the system side and an FXS on the remote end and point them at each other.
|
|
|
|
|
Joined: May 2008
Posts: 523
Member
|
|
Member
Joined: May 2008
Posts: 523 |
Yes,
OfficeServ at location A
fiber only to location B
They want an analog port at location B.
Do they make a SIP station port device so I only need a device in location B or do I have to have an actual analog extension in the OfficeServ with an IP FXO module in location A and an IP FXS module in location B?
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
The spa devices I mentioned above will do what you need. Just need mgi/oas and 3rd party sip license.
You will need to look at the dial plan on the device so matches the numbers you want dial
|
|
|
|
Forums84
Topics94,428
Posts639,501
Members49,821
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
262
guests, and
55
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
