|
|
|
|
Joined: Jan 2006
Posts: 340
Member
|
|
Member
Joined: Jan 2006
Posts: 340 |
They don't have to wire anything internally. The 'Phone Line In' is the input. 'Alarm System' is where the alarm guy gets dialtone. Return dial-tone will go through the rj31x and wired internally, via cross connect, to the 'Phone Line Out' Box. As mentioned by other posters, instead of looking for rj-31x inserts, just put surface boxes together on a piece of wood.
Shawn
Absolute Communications, Inc.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Shawn, I was keying off your last post. -------------------------------------------------- Phone Line IN [6p4c] Phone Line OUT [rj31x] ALARM System [8p8c] -------------------------------------------------- You were indicating RJ31X as 'phone line out' and nowhere for the alarm company to connect, except inside the RJ31X. I was expanding on Hal's post, trying to indicate what would happen if you went with your post. And in reading this post, it's not much clearer than mud. Hope you can decipher what I babbled on about.  John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Dec 2007
Posts: 908
Member
|
|
Member
Joined: Dec 2007
Posts: 908 |
Mind now I've only done a few of the RJ31X blocks so I always refer to Suttles drawing RJ31X.ie
network (co line in) 4&5 (telco wiring /ksu etc out)1&8 (registered terminal equipment /alarm dialers etc) 8 pin plug removes shorting bars and allows the co into the terminal equipment (alarm box) and back out to (telco wiring/ksu) of course this is from an older Suttle connections and cabling systemsmanual page 102.
|
|
|
|
|
Joined: Dec 2002
Posts: 9,428 Likes: 1
Member
|
|
Member
Joined: Dec 2002
Posts: 9,428 Likes: 1 |
I'm confused too...I always plug the alarm panel into an RJ31X jack. In the above situation where you said you were going to use a normal 8P8C jack, what happens to the shorting bars?
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
Forums84
Topics94,412
Posts639,420
Members49,815
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
209
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
