|
|
Joined: Feb 2009
Posts: 4
Member
|
Member
Joined: Feb 2009
Posts: 4 |
Hello, all.
I have NEC DSX80s (version 3.14) installed at separate sites with an 8 license VOIP DB installed in each. At each site, I have installed a Linksys PAP2T that is connected to CO lines 7 and 8. Both PAP2Ts have registered successfully with the remote sites DSX80. Interoffice communication works as it should if a user picks up line 7/8 and dials the 3 digit extension of a remote user. However, if a user dials 401 or 402 (the local VOIP extensions) from intercom, the remote DSX80 will ring in on line 7/8, but the caller can't hear the remote site or vice-versa. This happens in both sites.
Perfect interoffice calling from the ATA to the remote VOIPDB, but not from the VOIPDB to the remote ATA.
Summary of setup
NEC DSX80 (192.168.112.7)-------Router(192.168.112.254)~~~~P2P T1~~~~Router(192.168.111.254)-----Linksys PAP2T(192.168.111.8) to CO Lines 7/8 on NEC DSX80 (192.168.111.7)
and
NEC DSX80 (192.168.111.7)-------Router(192.168.111.254)~~~~P2P T1~~~~Router(192.168.112.254)-----Linksys PAP2T(192.168.112.8) to CO Lines 7/8 on NEC DSX80 (192.168.112.7)
Any ideas?
-- Dan
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Oct 2011
Posts: 13
Member
|
Member
Joined: Oct 2011
Posts: 13 |
Did you open the needed RTP ports on each router?
|
|
|
|
Joined: Sep 2004
Posts: 4,214 Likes: 2
Member
|
Member
Joined: Sep 2004
Posts: 4,214 Likes: 2 |
No voice usually means no UDP packets getting through.
|
|
|
Forums84
Topics94,422
Posts639,464
Members49,818
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|