RFID readers

Support Service-Disabled Veterans!
Discount software from Direct Deals

Print Thread

Rate Thread

Page 2 of 2

1

2

Re: RFID readers #464670 09/05/08 09:23 AM
Joined: Jan 2006 Posts: 212 Sebring, Florida cosmo57 Member
cosmo57 Member Joined: Jan 2006 Posts: 212 Sebring, Florida	For the Door Strikes we are using the HES 5000 12/24. That is what we have at several Police Departments and our office. Were using ESI time line and that is working great too. The reports are OK for getting the info on who comes and goes. Cosmo Rick "Cosmo" Mercure Tri Star Telecom Sebring, FL http://www.tristartelecom.net

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: RFID readers #464671 09/10/08 05:08 AM
Joined: Mar 2006 Posts: 575 Hawthorne or Melville, New Yor... RobCalltrol Member
RobCalltrol Member Joined: Mar 2006 Posts: 575 Hawthorne or Melville, New Yor...	I've got ESI-Access 2.14.7 and an X-256 with the latest release (as of last january) and I don't see F-72 as a report option. Rob Cashman Customer Support Engineer

Re: RFID readers #464672 09/10/08 10:32 AM
Joined: Nov 2004 Posts: 1,582 Likes: 1 40 miles North of Phila nonameyet Moderator-ESI - Executone
nonameyet Moderator-ESI - Executone Joined: Nov 2004 Posts: 1,582 Likes: 1 40 miles North of Phila	I think that report is only in the Communication Servers version... I can see the light at the end of the tunnel.. Retirement 2019 ( It has happened )

Re: RFID readers #464673 09/24/08 09:42 AM
Joined: Jun 2005 Posts: 14 Plainfield, Il, USA ITcomm1 Member
ITcomm1 Member Joined: Jun 2005 Posts: 14 Plainfield, Il, USA	Hi everyone, I have recently, due to an install, became rather versed with door control. (one school with 12 doors) Yes, you have to match the door strike with the PS voltage, but I have been made aware that if you have a 24vdc supply, and the voltage is higher than 24vdc (27vdc) it can cause problems. Bogen makes a power supply that works pretty well. Also, I was first shipped the door boxes that had the diact soldered directly on pins 5 and 6. I have since replaced all of them with the latest model because the door box would lock up. If all is correct and the moon is in the right phase it seems to work very well, but beware of the pitfalls first.