|
|
|
|
Joined: Jun 2008
Posts: 29
Member
|
|
Member
Joined: Jun 2008
Posts: 29 |
Has anyone seen this error before on their PRI? Carrier is saying everything is clean. However, if I look at the error report I will see 1/2 a dozen MJD01 (Sync errors) the day prior to the Bit Errors showing up. The Bit errors will be constant until I reset the PRI then everything works for a day or so and then the process repeats its self.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
What version of software do you have on your pri card?
What model system do you have?
|
|
|
|
|
Joined: Jun 2008
Posts: 29
Member
|
|
Member
Joined: Jun 2008
Posts: 29 |
OS100, MCP 2.72, PRI 4.15. Sorry I should have included that however in my opinion its irrelevent since the system has been running for 4 years
|
|
|
|
|
Joined: Feb 2005
Posts: 137
Member
|
|
Member
Joined: Feb 2005
Posts: 137 |
I have had simular occurances on older PRI software. I've used Adtran ACE CSU's to resolve it sometimes but have also found taking the PRI to current release 4.26 helps a lot of the times. Good Luck
|
|
|
|
|
Joined: Jun 2008
Posts: 29
Member
|
|
Member
Joined: Jun 2008
Posts: 29 |
Spoke with Tech support regarding this issue and I was informed that bringing the TEPRI card up in rev levels will most likely not help. I was informed that some of the OS100's backplanes have had issues with Telco circuits that come in as SIP trunks and then converted to a PRI by their routers, which is becoming very common in Vegas. He said if you look at the backplane there is a screw in the middle of the board next to the MEM slot, if the screw has ridges on the head the backplane should be fine, if it is smooth the backplane may very well be the issue.
Headed to site today to see which backplane I have.
|
|
|
|
Forums84
Topics94,422
Posts639,465
Members49,818
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
426
guests, and
103
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
