|
|
Joined: Apr 2001
Posts: 2
Member
|
Member
Joined: Apr 2001
Posts: 2 |
I read the procedure for activating a new CO line on the 1024...would this be the same for an 308 (which is what i am looking to add the new CO)
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
tony No the 308 has different programming.To activate a line on the 308 you have to do the following. In "Line Class Of Service" make sure the line isn't disabled. With handset down at station 10 Intercom *746* Press the line you want to add Dial 2 Dial * Press (Monitor or Speaker)to end
For Station Class Of Service Intercom *746* Dial station number (10-17) Dial 7 Press line (Key1-3) Dial (1-3) Dial * Press (Monitor or Speaker)to end Hope this helps dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Apr 2001
Posts: 2
Member
|
Member
Joined: Apr 2001
Posts: 2 |
I attempted the procedure you described without success. At station 10, when i pressed intercom and dialed *746*, the system returned fast busy. This is a Comdial Executech 308 system where all sets have line 3 setup as speed call key. What did I miss? Thanks for the reply.
|
|
|
|
Joined: Mar 2001
Posts: 577
Member
|
Member
Joined: Mar 2001
Posts: 577 |
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
tony How old is this system? There should be a white tag on the right side of the KSU that will tell you exactly what you have. If ITCM *746*gets you in.Then the steps in my other post will set up line three on your system.If ITCM*#746* gets you in then you have a (NO system) which programs like a 1024. Make sure you are programming at station 10 with the handset in the craddle.Let me know what happens. If you would like I can fax you the program charts for either system. dtmf
[This message has been edited by dtmf (edited 04-24-2001).]
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
tony you didn't miss anything. dtmf gave you the programming for the older 308 (tan) front, I think yours has a black front case on it, which is an "NO 308" which will program like openwire said ITCM*#746* and follow the 1024 manual you have. A fast busy means an error, make sure the handsets in it's cradle and your at station 10. (to find station 10 go to a phone and dial 0, where it goes, is station 10) try to use a phone that's in a back room somewhere because if ya try the test above from station 10 you'll be trying to call yourself. Hope that wasn't confusing.
|
|
|
Forums84
Topics94,395
Posts639,309
Members49,804
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Yoda),
146
guests, and
459
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|