|
|
|
|
Joined: Apr 2009
Posts: 6
Member
|
|
Member
Joined: Apr 2009
Posts: 6 |
I have an Electra Elite 48 system that the first two extensions do not work on. I have no voltage on the lines coming out of the system. I don't normally work on phones, so I need help or advice. I know the first 8 extensions are on the main board. are there any fuses on it for these lines? The other 6 extensions work fine.
thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
check the 25 pair AMP connection on the inside of the bottom right of the cabinet, make sure it is securely snapped into the connector.
The connectors will sometimes cock out slightly and this will cause the first couple of ports to not work.
The digital ports built onto the main CPU rarely go bad, let alone two....
D
|
|
|
|
|
Joined: Apr 2009
Posts: 6
Member
|
|
Member
Joined: Apr 2009
Posts: 6 |
Thanks, it works now. the connector on the bottom was a little loose.
Jim
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
There should be a velcro strap that you can use to hold them in place. If not, you can anchor them with cable ties.
|
|
|
|
Forums84
Topics94,422
Posts639,465
Members49,818
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
346
guests, and
78
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
