atcomsystems.ca/forum Forums Other TDM Phone Systems Other Telephones & Systems Atlas KDX 500 Central Hunt

Does anyone know how to setup where all the trunks ring in to a station hunt group and rings to two Digital Sets and Two Single Line Phones?
I keep setting up the hunts for the trunks and for the stations but for some reason it will not ring to those stations. Need help.

hi you can try this.
(Mode 65) Trunk Station Hunt Group Ringing - Day
Each Trunk can be set to ring a Station Hunt Group for Incoming Calls.
A Station Hunt Group can be set for both Day Mode and Night Mode.
If one or more Stations from the assigned Station Hunt Group are already ringing due to
being a Flexible Ring Station, Console, or Second Console, no extra Station from the
Station Hunt Group will ring.
If set to 0 no Station Hunt Group will be used.
See (Station Programming Section - Mode 60) Station Hunt Groups for how to set up a
Station Hunt Group.
Programming Procedure:
Step 1: Enter Programming Mode by Pressing [xxxxxxxxxxxx] from any
Display phone.

M:. 
Enter Mode No. 

Step 2: Enter Mode 65

M:65 . 
ST GP RING - DAY

Step 3: Enter Trunk number 01 - 96

e.g. Trunk 4 has no Station Hunt M:65 04 0
Group set. ST GP RING - DAY

Step 4: Enter Station Hunt Group number 1- 8 or press FLASH to set to 0.

e.g. Set to Station Hunt Group 2 M:65 04 2
ST GP RING - DAY

Step 5: Press HOLD to save change.

*:65 04 2
ST GP RING - DAY

Step 6: (Optional) Press CONF to set ALL Trunks the same.

*:65 04 2
ST GP RING - DAY

Series 500 Software PROGRAMMING GUIDE
________________________________________________________________________
________________________________________________________________________
June 2000 Trunk Programming Section Page 33
Step 7: (Optional) Press TRF to scroll forward to next Trunk or MIC to move backward to
previous Trunk. Repeat from Step 4.

e.g. Move to next Trunk M:65 05 0
Trunk 5 has no Station Hunt ST GP RING - DAY
Group set.