SLT Off-Hook Preference

Support Service-Disabled Veterans!
Discount software from Direct Deals

Print Thread

Rate Thread

Page 1 of 2

1

2

SLT Off-Hook Preference #217849 04/06/10 09:02 AM
Joined: Jul 2006 Posts: 43 Southern Maryland VodaviTech Member
VodaviTech Member Joined: Jul 2006 Posts: 43 Southern Maryland	Has anyone setup a SLT phone to go off-hook and dial a speed bin? I looked in the manual and it doesn't appear to be available but wanted to see if anyone had a work around e.g. macro. Thanks.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: SLT Off-Hook Preference #217850 04/06/10 09:28 AM
Joined: Jul 2007 Posts: 388 Rapid City SD MNCommunications Member
MNCommunications Member Joined: Jul 2007 Posts: 388 Rapid City SD	I can't say I have done it but wouldn't it work to program button 1 for the slt as a speed bin then program off hook pref as enabled for button 1?

Re: SLT Off-Hook Preference #217851 04/06/10 09:34 AM
Joined: Aug 2003 Posts: 5,154 Likes: 3 Gainesville, FL, USA nfcphoneman Moderator-Vertical, Vodavi
nfcphoneman Moderator-Vertical, Vodavi Joined: Aug 2003 Posts: 5,154 Likes: 3 Gainesville, FL, USA	What system? XTS? Did you look in the manual for Hot Line or Ring Down? MNCommunications suggestion should work for you. Gainesville Telephone Systems Jacksonville Telephone Systems

Re: SLT Off-Hook Preference #217852 04/06/10 09:52 AM
Joined: Jul 2006 Posts: 43 Southern Maryland VodaviTech Member
VodaviTech Member Joined: Jul 2006 Posts: 43 Southern Maryland	It's an old STS v.1.00. I was able to program button 1 for line 001 and grabbed dialtone but when I programmed button 1 for bin 9020 it just stayed on intercom tone. Perhaps it's an issue with the version number.

Re: SLT Off-Hook Preference #217853 04/06/10 10:57 AM
Joined: Jul 2004 Posts: 345 Phoenix AZ OldH2oSkier Member
OldH2oSkier Member Joined: Jul 2004 Posts: 345 Phoenix AZ	Must be software related I tested this in our test room and it works great. Offhook pref S/L to line one and program line one for SPD bin 9020 go offhook and call goes out. Tested on ver.1.04 Scott

Re: SLT Off-Hook Preference #217854 04/06/10 11:28 AM
Joined: Jan 2008 Posts: 3,821 Crestview Fla Derrick Retired Moderator
Derrick Retired Moderator Joined: Jan 2008 Posts: 3,821 Crestview Fla	Just program SLT buttton one for the speed dial bin. It shouldn't matter what line it goes out on. www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.

Re: SLT Off-Hook Preference #217855 04/07/10 03:38 AM
Joined: Jul 2006 Posts: 43 Southern Maryland VodaviTech Member
VodaviTech Member Joined: Jul 2006 Posts: 43 Southern Maryland	Tech support is sending me updated EPROMS. Scott, were you able to get this working on an STS or was it an STSe? Tech support didn't have version 1.04 in the lab but they did have 1.03 and could not get it working. They thought it wasn't available until the STSe came out.

Re: SLT Off-Hook Preference #217856 04/08/10 06:54 AM
Joined: Jul 2006 Posts: 43 Southern Maryland VodaviTech Member
VodaviTech Member Joined: Jul 2006 Posts: 43 Southern Maryland	Well now I'm just dumbfounded. I went to one of the customer's other locations that has an STSe version 2.00 and still cannot get an SLT to go offhook and dial a speed number. Built-in SLT extensions 148 and 149. Button 1 programmed for speed bin 9020. Bin 9020 programmed for a local number. Stations 148 and 149 programmed for offhook preference button 1 enabled. Go offhook and just get intercom tone. I have no problem getting this to work on a digital station. Not sure what I'm missing.

Re: SLT Off-Hook Preference #217857 04/08/10 06:54 AM
Joined: Jul 2006 Posts: 43 Southern Maryland VodaviTech Member
VodaviTech Member Joined: Jul 2006 Posts: 43 Southern Maryland	Well now I'm just dumbfounded. I went to one of the customer's other locations that has an STSe version 2.00 and still cannot get an SLT to go offhook and dial a speed number. Built-in SLT extensions 148 and 149. Button 1 programmed for speed bin 9020. Bin 9020 programmed for a local number. Stations 148 and 149 programmed for offhook preference button 1 enabled. Go offhook and just get intercom tone. I have no problem getting this to work on a digital station. Not sure what I'm missing.

Re: SLT Off-Hook Preference #217858 04/08/10 07:32 AM
Joined: Oct 2004 Posts: 1,492 central pa oobie Member
oobie Member Joined: Oct 2004 Posts: 1,492 central pa	Are you sure your entering the speed dial in correctly? and does it have line group access to the lines that would be used to dial the speed bin? Try a personal speed bin 9000-9019 and see if it works? I know it works I just set one up the other day in the same fashion.