atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Program Logical port to Analog Port?

We have a logical port # 22 that has a extension 222 and a logical port # 44 that has a 500 extension that is analog. I want to make port 44 have extension 222 and remain analog.

I tried the
(relocation by special dial0 #6283) but I am not sure I am doing it right.

I cant just punch 222 down on 44 because then I would cross digital to analog but I have to use extension 222? I have never had this problem before because I usually just change the punch downs but the customer specifically wants ext 222 which is on a digital port. I would appreciate the help

Ethernetman [email protected]

Program 04 ... delete the ext. #222 from port 22. Delete ext. #500 from port 44. Now reassign 222 to port 44 and 500 to port 22.

Remember station features such as class of service and button mapping are unique to port numbers, not station extension numbers.

Please, Please.....never use auto relocation feature on the Toshiba. It will totally screw up the next guy who tries to program the stations.) That was the voice of experience!!!

Good luck,

Dan

Thanks, I looked up program 04 in my Toshiba manual and it worked like a champ!

eman