|
|
Joined: Nov 2005
Posts: 323
Member
|
Member
Joined: Nov 2005
Posts: 323 |
KXTD-1232-4 Can I put splitter on XDP port and use 2 analog devices, 1)an auto dialer through a computer modem, and 2)a slt.
Also, if autodialer dials a phone number from XDP port, how can I pick up and talk to called party from that Panasonic digital phone?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
yes.
Turn off XDP port so that it is same extension as phone. Enable parallel operation. When modem finish dialing, press the green line button and hit Hotkey to drop modem. Or put as many pauses as needed then hangup command as suffix to all numbers. This will give you time to push button and modem will drop off automatically. You need a modem you can hear dial.
You could also try leave XDP on, it is now a diff ext. Put in "flash, your ext, hangup" as a suffix to each number. This would transfer the call to the digital phone and then hangup. You would just hit speaker or grab handset to answer. Depending on line type and provider you may need to put a pause or two before the flash so the call starts ringing before the modem hangs up.
Make sure that modem is set to not answer.
|
|
|
|
Joined: Jan 2007
Posts: 2,124 Likes: 4
Admin
|
Admin
Joined: Jan 2007
Posts: 2,124 Likes: 4 |
If you use the modem with a speaker, with xdp off as Brokeda said, when you hear the call ringing on the modem, pick up the handset/ press spphone on the 7453 and it should take the call from the modem,then click hang up on the modem.
(Works on the uk system that way)
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Joined: Nov 2005
Posts: 323
Member
|
Member
Joined: Nov 2005
Posts: 323 |
Thank you all. I didn't know if I would have to use the exec. call barge in feature if I enabled the XDP or how to accomplish this. The parallel port sounds like the way to go.
|
|
|
Forums84
Topics94,395
Posts639,309
Members49,804
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
303
guests, and
273
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|