atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Wiring a TVS100 to a TD1232

The TVS100 seems to b a 2 port, it has just one card with two jacks. I wired them to jacks 15 and 16 on T-R and D1-D2 USOC style. I went to system programming and set master 15 and 16 for the voice message ports. WHen I dial intercom 165 the display reads not in use, not configured or something like that, I forgot the exact message. What did I do wrong?

You have to put all 2 pairs of ext 16 to the right jack and only set ext port 16 to be vm.

I see. So by right jack you mean the right, not left, jack in the TVS? Did I get the T-R and D1-D2 pairs right? As you know there are 3 pairs per jack. So we are talking the WB/BW and WO/OW pairs, right?

all you you need is the orange pair d1+d2 on a
a jack 16 to pins 3 + 6 and off of that you get 2B+d
or a 2 for 1 trade and like obt says tell the td that jack 16 is a vm port....

OK, I see, wire it up exactly like a DPT. So that would be the "digital integration" and in that method I do not even use the left RJ11 jack on the VM card?

Only if you mounted the box upside down :-)

The last time I looked, port 1 is on the left.
https://public.carl.airpost.net/Pana/TVS/TVS-100_Connection.pdf

Carl

left

Right!