|
|
Joined: Nov 2004
Posts: 524
Member
|
|
Member
Joined: Nov 2004
Posts: 524 |
Need a bunch of FXS ports behind your Allworx system? No problem! The Cisco SPA8000 makes a great gateway for use with Allworx. It provides hunt group capability and CPC disconnect supervision. Users on the Cisco can park calls by hitting flash 700; Allworx will announce the park location or dial a park location number to retrieve parked calls. Email us if you need detailed configuration instructions. We did all the testing here in our lab.
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 222
Member
|
|
Member
Joined: Dec 2005
Posts: 222 |
Thanks for the great info. I would like the config settings
|
|
|
|
|
Joined: Sep 2006
Posts: 149
Member
|
|
Member
Joined: Sep 2006
Posts: 149 |
The SPA8000 is configured much like the PAP2, isn't it?
|
|
|
|
|
Joined: Nov 2004
Posts: 524
Member
|
|
Member
Joined: Nov 2004
Posts: 524 |
Yes. They're both Sipura products I believe. SPA is an 8 FXS with the added function of hunt groups. Hunt groups allow you to create your own line rollover sequence behind a single SIP registration. We have also been using this gateway with ITSPs such as nexvortex.com
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
|
|
Joined: Aug 2005
Posts: 85
Member
|
|
Member
Joined: Aug 2005
Posts: 85 |
So we can use the Cisco SPA8000 analog port for faxes and have the SIP DID's point to the faxes and work w/o glitches? Looking for a way to eliminate the hard wired fax lines. Thanks.
|
|
|
|
|
Joined: Sep 2006
Posts: 149
Member
|
|
Member
Joined: Sep 2006
Posts: 149 |
If it supports the T.38 protocol then faxing should work reliably.
|
|
|
|
|
Joined: Dec 2005
Posts: 818
Member
|
|
Member
Joined: Dec 2005
Posts: 818 |
Just because the system supports the SIP DID's or T.38 does not necessarily mean the SIP carrier will support faxing over their network. Make sure they do.
Steve
|
|
|
|
|
Joined: Nov 2004
Posts: 524
Member
|
|
Member
Joined: Nov 2004
Posts: 524 |
Here's a quote from the manual. We have not tested it, so I can't speak from field experience.
"Note: One fax machine is connected to each pair of ports to illustrate that only one T.38 connection is supported by each of the four pairs of RJ-11 ports. Up to four T.38 fax machines can be connected to the SPA8000, but they must be connected on every other port as shown."
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
|
|
Joined: Nov 2004
Posts: 524
Member
|
|
Member
Joined: Nov 2004
Posts: 524 |
We finished testing today with the SPA8800 (4) FXS and (4) FXO gateway. PM me if you wish to have the integration notes.
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
|
|
Joined: Jan 2010
Posts: 1
Member
|
|
Member
Joined: Jan 2010
Posts: 1 |
I have installed a Cisco SPA8000 connected to a
Linksys WRT54g router. I put the SPA8000 in a DMZ.
The ITSP is Nexvortex. I can make calls fine with
good audio both ways. When incoming calls are answered the audio is 1 way (can't hear the caller).
Would changing to the WRT54gl fix this? I noticed on a Linksys forum that SPI may be a cause for this problem. This is the 1st SPA8000 I've installed.
|
|
|
|
Forums84
Topics94,422
Posts639,464
Members49,818
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
381
guests, and
516
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
