web statisticsweb stats

Business Phone Systems

Support Service-Disabled Veterans!
Discount software from Direct Deals
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
Joined: Jul 2007
Posts: 12
Member
Member
Offline
Joined: Jul 2007
Posts: 12
Hello,
I would appreciate any info, opinions, and advice; I have read a lot of the posts here and look forward to your insights. As the Systems Admin I have been tasked with the installation of a phone system at our new location.
We are moving 50 people into a brand new location that has all been cabled already. I work for a District Attorney's office and we are moving into the new courthouse. I have a closet for my space it is 8ft x 24ft There are racks on one side with the data cabling terminated in patch panels and black plywood on the other side with the station cables terminated to 110 blocks. I am going to use an IP phone system that will use 10/100 POE switches. These will be mounted in the racks on the data side of the room. I want to know what the best way of connecting between the 110 block and the switch.
My vendor is not addressing this in a manner that gives me a confident feeling.
I have thought of three solutions
1) Cable from the 110 blocks to a RJ45 patch panel and use patch cords.
2) Un do the 110 blocks and replace with RJ45 patch panels and use patch cords.
3) Punch the cable into the 110 and terminate the other end with an RJ45 plug. ( I have seen this done in my current building, but does not really seem to be the way to go, but I do not know)
What would you recommend?
Thank you in advance for taking the time to enlighten me and help me make an intelligent (I hope!) and informed decision!
Bill

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2005
Posts: 15,383
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,383
Likes: 13
Bill:

How about something like this? This particular manufacturer makes them in lengths up to ten feet, however there are plenty of other manufacturers who might make them longer if you need it:

https://www.icc.com/productsearchresults.aspx?searchterms=icpcsb10bl&limit=&sortBy=default


Ed Vaughn, MBSWWYPBX
Joined: Jul 2006
Posts: 2,748
Likes: 18
Admin
***
Admin
***
Joined: Jul 2006
Posts: 2,748
Likes: 18
Probably in order, I like option 1 then 2 and never 3. The availability of Cat5e 25 pair cable would be the only issue for option 1.
It has the same effect as #2, but you don't have to undo the house cable and reterminate.

If you're really into punishment, you could try running the cable from the patch panel to another set of 110 blocks and use 4-pair Cat-6 cross connect wire.

BTW I've tried the Siemon 110 to RJ-45 patch cables. Besides being expensive, I've not had very good luck with them staying in place. However, the ICC brand is less than the cost of a patch panel and pretty competitive. They're only listed in 3/7/10' lengths.


Carl


This model is end of life
Joined: Jul 2007
Posts: 12
Member
Member
Offline
Joined: Jul 2007
Posts: 12
Wow! That was quick!
Ed: Really neat widgets, if the switches were mounted next to the blocks I would probably use them. I need to go up over and down to get to the switches.
Carl: Thanks, I have mostly old Merlin type stuff in my building and it is all terminated as I described in option three, I just don't like it.
I did not think the station cabling would be terminated on 110, oh well you know what they say about assuming!
Thanks again.

Joined: Jan 2006
Posts: 356
Member
Member
Joined: Jan 2006
Posts: 356
Sounds like the cabling vendor wasn't sure that there was a Voice over IP switch going in, otherwise he would have (should have) punched the station cables to a patch panel and installed them on the same racks as your data cabling. The VOIP switch is probably rack-mounted also, isn't it? If you are not segregating the voice from the data (recommended), you could even use the same cable for the PC as the VOIP phone.

Joined: Jan 2005
Posts: 15,383
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,383
Likes: 13
The cabling contractor did nothing wrong. It sounds to me like they were just following industry standards for voice cabling. Just because VOIP systems have a 4.1% share of the market doesn't necessarily justify completely re-vamping the entire industry. Voice cabling in the other 95.9% of the market terminates upon 110 or 66 type blocks in the United States.

It stinks that customers are having to add yet another expense in adapting to VOIP equipment. If this had been my installation, I would have done the same thing by using 110 blocks. Often, cabling contractors aren't even the parties who will be installing the phone system. It's not their responsibility to deviate from standard practices to wire for something different.

Perhaps the VOIP hardware providers might want to consider in their quest to take over the industry that they make their hardware interface directly with existing wiring infrastructures.

[Linked Image from img108.exs.cx]


Ed Vaughn, MBSWWYPBX
Joined: Jul 2007
Posts: 12
Member
Member
Offline
Joined: Jul 2007
Posts: 12
I agree with Ed completely. It was my assumption. The contractors did a beautiful job and if I had been thinking at all I would have realised that the telco would be terminatedas it has been.
Sooo... now I have to come up with a plan.
Thanks again.

Joined: Feb 2005
Posts: 12,347
Likes: 4
Member
***
Member
***
Joined: Feb 2005
Posts: 12,347
Likes: 4
Perhaps the VOIP hardware providers might want to consider in their quest to take over the industry that they make their hardware interface directly with existing wiring infrastructures.

That would be a good idea except they have no clue how anything is done except data.

I believe your solution #1 is the best. Never a good idea to disturb the existing wiring and terminations. That way you can rip everything out and go back to a TDM system without too much trouble when the you know what hits the fan. :thumb:

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Joined: Jan 2005
Posts: 15,383
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,383
Likes: 13
Well, Bill... All that I can say is that you did the right thing by coming here to ask the question and we truly appreciate it.

So many people don't ask and end up being "bamboozled" with techno-jargon. As Hal mentioned, by leaving the wiring undisturbed and paying the extra for a transition hardware, you'll leave the next tenant with a wiring system that can be used.

Bill, please keep us posted as to how things go. By the way, welcome to our forum!


Ed Vaughn, MBSWWYPBX
Joined: Dec 2005
Posts: 222
Member
Member
Offline
Joined: Dec 2005
Posts: 222
We have done it the way Ed says, with the 110/rj45 patch cables. We make our own cables. We purchase the 110 ends and terminate


Serving greater Fond du Lac WI with Allwrox and Panasonic Phone Systems
www.fdl.net
www.jzorn.com
Page 1 of 3 1 2 3

Moderated by  Silversam 

Link Copied to Clipboard
Newest Topics
1A2 key system A-Lead issue.
by Rupert - 10/29/24 09:01 PM
105A MOH
by John807 - 10/29/24 03:31 PM
How to repair Samsung OS 7100 Power Supply
by NateBates - 10/28/24 07:25 PM
Office serve 7030
by Dean Badelek - 10/26/24 03:56 AM
Forum Statistics
Forums84
Topics94,422
Posts639,464
Members49,818
Most Online5,661
May 23rd, 2018
Newest Members
AndyW251, Dean Badelek, PCCsup, spoonmagician, Eddie5
49,818 Registered Users
Top Posters(30 Days)
Toner 7
R4+Z 4
pvj 3
Eddie5 2
Rupert 2
Who's Online Now
1 members (newtecky), 87 guests, and 107 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2024
Powered by UBB.threads™ PHP Forum Software 8.0.0