web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Feb 2017
Posts: 60
Likes: 1
Jared R Offline OP
Member
OP Offline
Member
Joined: Feb 2017
Posts: 60
Likes: 1
I’m having some trouble with my Bogen TAMB2 paging access relay module along with my Indyme Connect CU5302H radio transmitter help button system and TOA BG1015 paging amplifier. I haven’t been able to test the paging feature yet from my Cisco UC320W VoIP phone system that I’m using as I don’t have that connected yet using the Cisco SPA112 ATA that I have, but when I push the Indyme help button, I don’t have audio coming from my PA speaker from the Indyme help button system; even if the dip switch on the Bogen TAMB2 is set for station or trunk modes. And when the dip switch is set to trunk mode, even though there’s no audio from the Indyme help button system, the entire audio system is what I would call “backwards” if you will. In other words, the static “pop” sound that the Bogen TAMB2 produces once a page is finished happens first and then once I can tell the Indyme help button system has finished the announcement from the indicator lights on the Indyme Connect CU5302H radio transmitter, the TAMB2 produces the paging tone last. I’m not sure how that is possible, unless there is some sort of wiring backwards. Any advice would be great if you know what might be going on wrong. If you need me to explain how I wired it as well, I’ll be willing to. Thanks a lot in advance!

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2010
Posts: 206
Member
Offline
Member
Joined: Jan 2010
Posts: 206
Never heard of a Indyme Connect CU5302H before. Why can't you just connect that directly to the amplifier instead of through a TAMB2? Also, there are too many variables here...how do you have all of this hooked up? Please draw a diagram that shows each component, the type of wire you've used between them and where on each unit they are interconnected. Also provide the DIP switch settings on the TAMB2.

Joined: Feb 2017
Posts: 60
Likes: 1
Jared R Offline OP
Member
OP Offline
Member
Joined: Feb 2017
Posts: 60
Likes: 1
I just purchased a Bogen TPU-35B paging amplifier and a Bogen WMT1-A transformer for my current Bogen TAMB2 paging access relay module and will be getting rid of my TOA BG1015 paging amplifier in hopes I can make everything work out with the same type of equipment being the same brand. I also have a gentleman helping me setting up the paging system and my Cisco VoIP phone system. Once I get all the paging parts and equipment which should be in a couple days, I will make a drawing if needed if I still need help. Otherwise, I’m hoping the gentleman will be able to take care of my problems I’m having. Thanks much in advance!

1 member likes this: Professor Shadow

Moderated by  metelcom 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,282
Posts638,762
Members49,764
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,436 Shoretel
188,256 CTX100 install
187,072 1a2 system
Newest Members
Nadisale, andreww, gohunt, Darrick, telecopippo
49,764 Registered Users
Top Posters(30 Days)
Toner 23
teleco 6
jc2it 4
dexman 4
Who's Online Now
1 members (justbill), 105 guests, and 130 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5