atcomsystems.ca/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems 3300 - how to disable trace?

I did something to enable a whole lotta stuff, if you know what the traces are and how to disable, please lmk! thank you!


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2023-02-07 18:47:48 Link 5 - To Mitel - HLen 4, ILen 65, IType 6
SAPI 0 TEI 0 C/R 1 P/F 0 NR 19 NS 115 INFO Orig PD=0x8 CR=0x5998 SETUP(0x5)
1 00000100 Information Element: Bearer Capability:
2 IE Length : 3 octets
3 1------- Extension bit : Not Continued
-00----- Coding Standard : CCITT
---00000 Info. trans. cap. : Speech
4 1------- Extension bit : Not Continued
-00----- Transfer Mode : Circuit Mode
---10000 Info. trans. rate : 64 kbits/s
5 1------- Extension bit : Not Continued
-01----- Layer identifier : 1
---00010 Layer 1 protocol : Rec. G.711 u-law
1 00011000 Information Element: Channel Identification:
2 IE Length : 3 octets
3 1------- Extension bit : Not Continued
-0------ Interface ident. : implicitly identified
--1----- Interface type : primary rate
---0---- Spare
----0--- Indicated channel : preferred
-----0-- D-channel indicator: not the D channel
------01 Info. chan. sel. : as indicated in the following octets
3.2 1------- Extension bit : Not Continued
-00----- Coding Std : CCITT Std
---0---- Channel indicated : by following octets
----0011 Chan/Map type : B-chan units
3.3 1------- Extension bit : Not Continued - Single channel
-0000010 Channel Number : 2
1 00011100 Information Element: Facility:
2 IE Length : 27 octets
3 1------- Extension bit : Not Continued
-00----- spare
---11111 Service discrim. : Protocol Profile (Networking Extensions)
0x8b, 0x1, 0x0, 0xa1, 0x15, 0x2, 0x1, 0x1, 0x2, 0x1,
0x0, 0x80, 0xd, 0x42, 0x52, 0x45, 0x4e, 0x44, 0x41, 0x20, 0x43, 0x48,
0x41, 0x56, 0x45, 0x5a,
1 01101100 Information Element: Calling Party Number:
2 IE Length : 12 octets
3 0------- Extension bit : Continued
-000---- Type of number : unknown
----0000 Numbering plan : unknown
3a 1------- Extension bit : Not Continued
-00----- Presentation : Allowed
---000-- Spare
------00 Screening : User provided, not screened
4 ******** Phone number : [xxxxxxxxxx]
1 01110000 Information Element: Called Party Number:
2 IE Length : 5 octets
3 1------- Extension bit : Not Continued
-000---- Type of number : Unknown
----0000 Numbering plan : Unknown
4 ******** Phone number : [6392]


ISDN VDsu-17 Mod 3 Port 1 - TUE FEB 07 18:47:48 2023 Call_Id:2f6
ISDN VDsu-17 Mod 3 Port 1
Incoming: Channel: 2 Calling Num: 310xxxxxxx Called Num: 6392
2023-02-07 18:47:48 Link 5 - From Mitel - HLen 4, ILen 10, IType 5
SAPI 0 TEI 0 C/R 0 P/F 0 NR 116 NS 19 INFO Dest PD=0x8 CR=0x5998 CALL PROCEEDING(0x2)
1 00011000 Information Element: Channel Identification:
2 IE Length : 3 octets
3 1------- Extension bit : Not Continued
-0------ Interface ident. : implicitly identified
--1----- Interface type : primary rate
---0---- Spare
----1--- Preferred/Exclusive: exclusive
-----0-- D-channel indicator: not the D channel
------01 Info. chan. sel. : as indicated in the following octets
3.2 1------- Extension bit : Not Continued
-00----- Coding Std : CCITT Std
---0---- Channel indicated : by following octets
----0011 Chan/Map type : B-chan units
3.3 1------- Extension bit : Not Continued - Single channel
-0000010 Channel Number : 2

2023-02-07 18:47:48 Link 5 - From Mitel - HLen 4, ILen 5, IType 5
SAPI 0 TEI 0 C/R 0 P/F 0 NR 116 NS 20 INFO Dest PD=0x8 CR=0x5998 ALERTING(0x1)

2023-02-07 18:48:10 Link 5 - From Mitel - HLen 4, ILen 5, IType 5
SAPI 0 TEI 0 C/R 0 P/F 0 NR 116 NS 21 INFO Dest PD=0x8 CR=0x5998 CONNECT(0x7)

2023-02-07 18:48:10 Link 5 - To Mitel - HLen 4, ILen 5, IType 5
SAPI 0 TEI 0 C/R 1 P/F 0 NR 22 NS 116 INFO Orig PD=0x8 CR=0x5998 CONNECT_ACK(0xf)

2023-02-07 18:48:12 Link 5 - To Mitel - HLen 4, ILen 9, IType 5
SAPI 0 TEI 0 C/R 1 P/F 0 NR 22 NS 117 INFO Orig PD=0x8 CR=0x5998 DISCONNECT(0x45)
1 00001000 Information Element: Cause:
2 IE Length : 2 octets
3 1------- Extension bit : Not Continued
-00----- Coding Standard : CCITT
---0---- spare
----0010 Location : Public network serving the local user
4 1------- Extension bit : Not Continued
-0010000 Cause code : normal call clearing


ISDN VDsu-17 Mod 3 Port 1 - TUE FEB 07 18:48:12 2023 Call_Id:2f6
ISDN VDsu-17 Mod 3 Port 1
Incoming: Cause: Normal Call Clearing

Would either of these commands make sense?

CCS TRACE DISABLE
PMS TRACE DISABLE

That looks like EDT Trace output. Look in the online help under "Maintenance" -> "Commands" -> "EDT", you can toggle it off but you need to know the PLID of the PRI interface.

Thanks for the advice, don't know what I did but now there's some of the same and more stuff! System reboots once a week, this survives the reboot.



ISDN VDsu-17 Mod 3 Port 1 - WED FEB 15 14:27:31 2023
CI 3565 0 f2 8147 0x12e2a2c8 5 0 UAPI_CON_CONF
(RECD...T1-Usr - 5ESS NI2 - NI2_5ESS) P_Id:0x12e2a2c8 C_Id:8147 TotLen:8(Exp + Raw), PrLen:8
Private IE's:
UserUserIe 0,7e,5,78,0,2,0,46,


ISDN VDsu-17 Mod 3 Port 1 - WED FEB 15 14:27:31 2023
CO -4381 0 8147 12e2a2c8 5 0 11d50a76 NAM *4*4#*166*1 2 3 4#*58*CP*K#


ISDN VDsu-17 Mod 3 Port 1 - WED FEB 15 14:27:31 2023
CO -4382 0 8147 12e2a2c8 5 0 11d5090e CCM *58*CP*G#