|
|
|
|
Joined: Aug 2020
Posts: 1
Member
|
|
Member
Joined: Aug 2020
Posts: 1 |
I am having issues connecting to this system directly. I have Procomm set to Direct connect 9600 and I believe I have the cable wired correctly. I am getting only one screen about calls in progress but can't pull up the main config page. Nothing i press does anything but this screen. Is there anything else I need to do? This is a new cpu card so there is no programming on it yet. The cable I have only has 3 wires used. RJ45 pins 5, 6, and 4 go to db9 2,3,and 5 respectively.
Last edited by Henry VIII; 02/12/22 09:58 AM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2004
Posts: 1,582 Likes: 1
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,582 Likes: 1 |
what port are you plugged into? also, what emulation are you using? ( It's been a LONG time ago , the last time i messed with a " 84 " )
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Sep 2001
Posts: 2,355 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,355 Likes: 9 |
Sounds like you are on the Operator screen press Ctrl P to get to programming
|
|
1 member likes this:
nonameyet |
|
|
|
|
Joined: Nov 2004
Posts: 1,582 Likes: 1
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,582 Likes: 1 |
Sounds like you are on the Operator screen press Ctrl P to get to programming Thats exactly what I was thinking.....about 2 hours After I responded
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
That should have gotten you into program mode.
If you want to stop that in the future go to B-Screen system
programming and there is an setting to turn that from a Y to N
Have a good one. Glad to see there are still some systems out there
as they were good for sure.
mjc
|
|
|
|
Forums84
Topics94,457
Posts639,628
Members49,824
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
37
guests, and
57
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
