|
|
|
|
Joined: Aug 2002
Posts: 1,078 Likes: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1,078 Likes: 1 |
I am supposed to move a Nitsuko DS-2000 which I am certain is the same as the NEC DS2000. I have the NEC DS2000 software and the NEC DS2000 cable. I connect the cable and start up the software. I use the DS2000 password with 8N1 19200 and it never connects. Is it just the case of needing a reboot? Or is it different software altogether?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2015
Posts: 472 Likes: 6
Administrator
|
|
Administrator
Joined: Feb 2015
Posts: 472 Likes: 6 |
Just a quick google search I found.
From any display telephone:Press ICM + #*#* + Password + HOLD
.•The default system passwords are:Installer (level 3) = ******
System Administrator 2 (level 2) = ****
System Administrator 3 (level 1) = ****
Try those numbers.
https://www.pbxmechanic.com/manuals/nec/NEC%20DS2000%20(Nitsuko)%20Hardware%20and%20Software%20Manual.pdf
On this same manual the modem connection is
The remote PC must have a modem connected.
Also,the default communications parameters of the CPUserial port are 4800 8 N 1 (4800 baud, eight data bits,no parity and 1 stop bit).
Last edited by Professor Shadow; 06/29/21 04:37 PM. Reason: No passwords in the open fourm per rules.
There is no such thing as stupid questions.
Just stupid answers.
|
|
|
|
|
Joined: Aug 2002
Posts: 1,078 Likes: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1,078 Likes: 1 |
Ok,I probably tried every speed except 4800. I will have to try again.
|
|
|
|
|
Joined: Feb 2015
Posts: 472 Likes: 6
Administrator
|
|
Administrator
Joined: Feb 2015
Posts: 472 Likes: 6 |
FYI,
I am not a telecom tech but I have dealt with communication issues with security and building controls such as fire and HVAC..
All I can say is baud and parity and bits make a difference as well as the correct cable to connect with.
Assuming the front end will work to connect with.
Of course the last obstacle is, did someone change the default password?
I had some motorola paging terminals once that required hayes1200 baud modems ( non auto baud) to work.
They would not work with autobaud modems.
Try to find one even 10 years ago,
There is no such thing as stupid questions.
Just stupid answers.
|
|
|
|
|
Joined: Aug 2002
Posts: 1,078 Likes: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1,078 Likes: 1 |
I tried every port speed and changed the speed in 0301 but did not work. No worries though. Thank you.
|
|
|
|
|
Joined: Dec 2007
Posts: 6,811 Likes: 19
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,811 Likes: 19 |
According to the hardware manual the default parameters are: 4800-N-8-1Remember this is an OLD system prior to Y2K...if you remember that. https://manualzz.com/doc/10326088/nitsuko-ds-2000-hardware
|
|
|
|
Forums84
Topics94,392
Posts639,299
Members49,804
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
268
guests, and
245
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
