|
|
|
|
Joined: Jul 2004
Posts: 291
Member
|
|
Member
Joined: Jul 2004
Posts: 291 |
Hey guys. I'm losing hope with my systems here.I have this question posted in both systems forums and figured i would try it here too. I have an old Executone 648 that i connected to a Zultys MX250 via a T-1. The circuit syncs up and looks like it works for the most part. I can call from one system to the other. The problem i am having is when i transfer a call from Executone to Zultys, the call is dropped. Engineers at Zultys originally told me the reason was because Executone was prepending the dnis digits with a # character. . Zultys sees the # as a delimiter character so it doesn't know what to do with the following digits. I was able to remove the # from the transfer sequence and thought that would fix the problem. It didn't. I get the same results. The Zultys guys are now telling me Executone is dropping the call. Below is a snap shot of the CAS Log of a transferred call.
Does anyone here know what it means ? The 5th line down DSP_ start_dtmf_collection is followed by 3 DTMF digits. Then "End of Dialing". What does the next few lines mean ?
Dec 11 10:58:42:683 - 2 - {0x20009} [147.464] [ptl_fsm] [CAS: 0/11] CAS_PTL_ST_IDLE -> CAS_PTL_ST_WINK_ON Rx 0xf
Dec 11 10:58:42:922 - 2 - {0x20009} [147.703] [ptl_fsm] [CAS: 0/11] CAS_PTL_ST_WINK_ON -> CAS_PTL_ST_WINK_OFF Rx 0xf
Dec 11 10:58:42:924 - 2 - {0x20009} [147.705] [ptl] [CAS: 0/11] Port 0 On(Ptl Notf Wink Off) state st_CC_IDLE
Dec 11 10:58:42:924 - 2 - {0x20009} [147.705] [ptl] [CAS: 0/11] Port 0 SetState: st_CC_IDLE(1) -> st_CC_WAIT_FOR_DTMF(26)
Dec 11 10:58:42:924 - 2 - {0x20009} [147.705] [cas_dsp] [CAS: 0/11] >> DSP_start_dtmf_collection
Dec 11 10:58:43:560 - 2 - {0x20009} [148.341] [cas_dsp] [CAS: 0/11] DSP:digit rx 0x32 2:
Dec 11 10:58:43:758 - 2 - {0x20009} [148.539] [cas_dsp] [CAS: 0/11] DSP:digit rx 0x30 0:
Dec 11 10:58:43:977 - 2 - {0x20009} [148.758] [cas_dsp] [CAS: 0/11] DSP:digit rx 0x31 1:
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] End of Dialing
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl_fsm] [CAS: 0/11] CAS_PTL_ST_WINK_OFF -> CAS_PTL_ST_ANSWER Rx 0xf
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] Port 0 On(Ptl Notf Answer) state st_CC_WAIT_FOR_DTMF
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] Port 0 SetState: st_CC_WAIT_FOR_DTMF(26) -> st_CC_SETUP_AWAIT_MEDIA_TRM(6)
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] media_request_frontend: port 0 ch 4107 media_status 0
Dec 11 10:58:45:040 - 2 - {0x20009} [149.821] [cas_dsp] [CAS: 0/11] DSP:media_info_rsp
Dec 11 10:58:45:040 - 2 - {0x20009} [149.821] [ptl] [CAS: 0/11] Port 0 SetState: st_CC_SETUP_AWAIT_MEDIA_TRM(6) -> st_CC_SETUP_SEND(7)
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2002
Posts: 4,305 Likes: 8
Moderator-Avaya, Polycom
|
|
Moderator-Avaya, Polycom
Joined: May 2002
Posts: 4,305 Likes: 8 |
I doubt that will work. Executone is a very old hybrid system. Zulus, is a IP system. Don't not work well together. Time to upgrade.
|
|
|
|
Forums84
Topics94,457
Posts639,628
Members49,824
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
163
guests, and
55
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
