atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Electra Elite 48/192 Connecting to VMS/Co-sessions

No duplicates, and Port 40 is the correct station EXT 145.

Is anything DIT'd to port 40's extension? MB 3-42/43.
In MB 4-01/4-02 is it assigned for delayed ring?
Line Key LED
Off Data = No ring
Green = Immediate Ring
Red = Delayed Ring

Yes, 05/42:DIT D=145 This appears to be the only CO/PBX No. it's assigned to.


Green on LK1 - 8

Green on LK1 - 8, this means that only lines 1-8 will ring. If you are programming from a 16 button phone, then turn on buttons 9-16 for lines 9-16. If you are using an 8 button phone then you have to switch to page 2 to get to lines 9-16. I suggest you go to www.wedophones.com and download a programming manual. The Electa IPK programming manual should do.

Maybe this is just my inexperience talking, but we only have 8 lines. Shouldn't then only the first 8 lines be necessary?


Edit: Tried it, still doesn't ring at his station. Verified he's port 40. I guess the confusing part is since according to the DIT assignment all calls coming in are going to port 01 (EXT 115) I feel like there are conflicting settings.

I'd like it to ring on 3 different ports, and then if nobody picks up, I'd like it to go to port 01's voicemail.

Seems I got something wrong in the process or I still don't completely understand how this works. I do have a programming manual though, physical in fact. It's very cumbersome and overwhelming, thank you for pointing me towards a PDF version.

Any trunks DIT'd to a specific extension will ring only that extension. Write down your DIT assignments for both day and night mode. Delete them then retest the ring assignment for your trunks.DIT's override MB 4-01/02.
Your assignment for 4-01/02 looks correct for only 8 trunks.

Any idea how I delete digits out of the DIT assignments? It doesn't mention deletion on the programming manual page. I tried 000 but incoming calls would just ring indefinitely when I did that.

This will be locked until the moderators can review to make sure it complies with board guidelines for information in the open forums.