|
|
|
|
Joined: Oct 2006
Posts: 22
Member
|
|
Member
Joined: Oct 2006
Posts: 22 |
I have two Questions on GLX 12.
The first is I lost all sets when I shorted a set, Replaced fuse #2 and dial tone came back but incoming calls do not ring!
I tried to re program moved Prgm switch to on
went to the closest set hit #01 and then line 1 and line 2 pick up and hang up, moved switch to on but still no ring.
After search I found that everything said to use #2 and L-1 L-2 pick up receiver and hang up. Is that all there is to it??
Also how do I get the intercom to hands free mode?
Thanks in advance,
Bob
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
Yes, #(pound)2 and hit your lines lift and replace handset. I don't have a user guide in front of me at the moment but if no one answers your handsfree question I will repost a bit later.
Rhett
|
|
|
|
|
Joined: Oct 2006
Posts: 22
Member
|
|
Member
Joined: Oct 2006
Posts: 22 |
O K I am going back up to the business and give that a try. The info that I had found with the system said to use #01 was that a old instruction, anyway it did not work.
Thanks for your help,
|
|
|
|
|
Joined: Oct 2006
Posts: 22
Member
|
|
Member
Joined: Oct 2006
Posts: 22 |
Just returned and RCA you were right on, the #2 worked.
Thanks Again
|
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
For handsfree intercom:
Program switch to on.
Go to keyset (phone) dial #(pound sign)32. Pick up and then hang up handset.
If that doesnt work try just dialing #3 and then pick up and hang up handset.
Last step is program switch to off.
I have a feeling that #3 is going to be the one that works for you.
Rhett
|
|
|
|
|
Joined: Oct 2006
Posts: 22
Member
|
|
Member
Joined: Oct 2006
Posts: 22 |
RCA, Again almost everything works just like you posted!!
I have 8 out of nine sets working with hands free on the Icom but one will not work with either number 3 or 38. What am I doing wrong???
Do I need to erase something at that set and re program it?
|
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
You might want to check that the station is not in DND. What exactly is the phone doing?
Rhett
|
|
|
|
|
Joined: Oct 2006
Posts: 22
Member
|
|
Member
Joined: Oct 2006
Posts: 22 |
Thanks,
The Phone will answer with the hands free on a incoming call and you will hear the I C announce (voice) but you have to pick up the receiver to talk to the other end.
I did not see a Do Not Disturb button, how do I check?
I think I looked up these sets and they are(from memory) 4200's. The other 8 sets work just like you said all ok except this one !! :bang: :bang:
|
|
|
|
|
Joined: Oct 2006
Posts: 22
Member
|
|
Member
Joined: Oct 2006
Posts: 22 |
Does anybody have any ideas where to go with this one set !!!
Thanks
|
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
Did you try swapping out the phone, maybe its bad?
Rhett
|
|
|
|
Forums84
Topics94,428
Posts639,501
Members49,821
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
374
guests, and
65
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
