I will give it a try. I'm using XP with Procomm Plus. What causes things to randomly change settings? I've had issues before with key assignments changing to other things.
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
If your line keys are changing to a code of 5535 that is a bug and you have to apply a debug routine to correct. Let us know how the I/O port thing works out.
I will give it a try. I'm using XP with Procomm Plus. What causes things to randomly change settings? I've had issues before with key assignments changing to other things.
If the system is not grounded or properly grounded will cause these to happen.
I have seen I/O ports go bad in older IDS systems after an electrical storm. If that's the case about all you can do is replace the CPU and reprogram which will be a fair size pain.
I was finally able to get connected to my system. It seems there was a wiring issue. It still seems like there might be an issue with the com ports though. The screens that don't have any "data" on them, such as the welcome screen or the reports menu look fine. I can also get into the VXC screen fine. Any of the other screens show the text fine, but the data is in the wrong place and I obviously can't change anything. For instance, in the A screen all of the data is in a long string at the bottom of the page, but the rest of the text on the page is where it should be. I've tried both com ports. Is it possible for them to be bad even though some stuff comes through fine? I have another CPU board that I popped in and it seemed to be fine.
Sounds like the Terminal type got changed. When you first log in and the Main Menu is coming up do CTL A for select terminal type. Then enter 1 and see if that corrects it for you.
I assume your lap top is set to TVI 920 25 rows and 80 columns and all other setting haven't changed?
check the Protcol on the ports of the system, You say You can make it work with Another CPU..( Back in the Old days Tech Support would have us Back up the system, then DEFAULT it , to see if the issues went away...
What should the correct Protocol info be? Unfortunately it doesn't look like I can just reload onto the other CPU, mine is an Eclipse and the other one is ACPU. I picked it up a while back for a spare. Perhaps I can try defaulting it this weekend.
I can email you a picture if you want to PM an email address.
