|
|
Joined: Apr 2005
Posts: 28
Member
|
Member
Joined: Apr 2005
Posts: 28 |
I need to change the ip address on a unit I just got and need to know what terminal emulation and settings to get in and do that. Thanks, Dave
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2005
Posts: 211
Member
|
Member
Joined: Jun 2005
Posts: 211 |
If it is new or has been defaulted, the IP will be 192.168.1.190, and you can change the IP via the web interface.
You'll need to set the PC communicating with the NBX to 192.168.1.191
If you must go in via serial connection (COM1 only), use:
Terminal emulation: VT100 Baud: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None
You'll now be at a bare VXWorks command prompt. If you are not familiar with VXWorks it will be far easier (and safer) to use a PC and switch to discover the current IP of your NBX100. I cannot stress that enough.
-Steve
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|