How to connect butt set to 110 block

Site Sponsor: Direct Deals

Print Thread

Rate Thread

Page 3 of 3

1

2

3

Re: How to connect butt set to 110 block #447261 11/13/08 03:48 AM
Joined: Jan 2005 Posts: 15,382 Likes: 13 Fayetteville, NC EV607797 Moderator-Vertical, Vodavi, 1A2, Outside Wire
EV607797 Moderator-Vertical, Vodavi, 1A2, Outside Wire Joined: Jan 2005 Posts: 15,382 Likes: 13 Fayetteville, NC	If you take a look at the illustration above, you will see the comcode listed for both versions. Graybar should be able to cross-reference this for you. Ed Vaughn, MBSWWYPBX

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: How to connect butt set to 110 block #447262 11/13/08 02:46 PM
Joined: Nov 2004 Posts: 290 Moore SC 29369 TDS Member
TDS Member Joined: Nov 2004 Posts: 290 Moore SC 29369	The AT-8662 has been discontinued but, they had two of the AT-8662d in the Atlanta Graybar. Got both of them.Since I have used of these before and they are the best.

Re: How to connect butt set to 110 block #447263 11/13/08 05:03 PM
Joined: Jul 2008 Posts: 12 Sacramento, CA Michael Goetz Member
Michael Goetz Member Joined: Jul 2008 Posts: 12 Sacramento, CA	Fast and cheapest, get 3 feet of 23AWG CAT6 and pull out a pair, strip about 2" off of one end and enough on the other end to wrap around your test leads. Go off hook on your set and lightly push the stripped conductors down ever so slightly to pull dialtone (over an existing jumper). If you have C4's or C5's without jumpers 24AWG will work fine, but if you have an existing jumper that's 24AWG then use a 23AWG test wire because the pins are already spread and this one will make better contact.

Re: How to connect butt set to 110 block #447264 11/17/08 06:45 AM
Joined: Apr 2005 Posts: 1,138 NJ, USA, Earth. liquidvw Member
liquidvw Member Joined: Apr 2005 Posts: 1,138 NJ, USA, Earth.	I made a custom cord for my butt set awhile back. Here is the link. You could easliy replace the RJ11 with a 110 connector. https://www.sundance-communications.com/forum/ultimatebb.php?/ubb/get_topic/f/1/t/001652.html#000000

Re: How to connect butt set to 110 block The Grim Reaper #634534 01/10/20 11:24 AM
Joined: Nov 2004 Posts: 51 Henniker, NH 03242 tpayson Member
tpayson Member Joined: Nov 2004 Posts: 51 Henniker, NH 03242	Bed of nails clips works if you've got room... Tim Payson Progressive Consulting Henniker, NH 03242 (602) 315-5194 "Old age and treachery will overcome youth and skill" - Lao Tzu

Re: How to connect butt set to 110 block tpayson #634537 01/10/20 11:48 AM
Joined: Dec 2007 Posts: 6,808 Likes: 18 Canby, Oregon Professor Shadow Retired Admin
Professor Shadow Retired Admin Joined: Dec 2007 Posts: 6,808 Likes: 18 Canby, Oregon	Originally Posted by tpayson Bed of nails clips works if you've got room... Sorry...you're about 11 years 3 months too late. Dean Photographs: https://www.instagram.com/deanwilsoncanby/ https://fstoppers.com/profile/deanwilsoncanby https://www.facebook.com/Dean-Wilson-Photography-112841337020414 Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience. "Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."