|
Joined: Jan 2004
Posts: 226
Member
|
Member
Joined: Jan 2004
Posts: 226 |
Can anyone give me some insight into what might be going on with a Dx-80 and voice mail issue? It seems to be locking up frequently. When it goes down, there is usually a line that shows is in use, but no one is on the line in the office. It will not let you access the line and at the same time the voice mail locks up and no one can get into there mailbox, the auto attendant stops, and when i dial 433 or 157 it just keeps on ringing. Ive been telling the customer to reboot the system(to get the vm back and the line). This seems to do the trick but its not to conveniant (sp) to have to rebbot the system every other day. Plus its a new install and its happened 7 times since it was put in ( 2 weeks ago). Thanks Fellas.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
Member
Joined: Oct 2001
Posts: 6,160 |
you need to go on site, boot up key link and bomb the system with calls to see what's happening. My guess is you have a disconnect supervision issue on one or more lines. This is an A33 system? mark
|
|
|
|
Joined: Nov 2004
Posts: 524
Member
|
Member
Joined: Nov 2004
Posts: 524 |
What's the temp of the room where the switch is installed? Below 50 F can cause this.
------------------
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
|
Joined: Jan 2004
Posts: 226
Member
|
Member
Joined: Jan 2004
Posts: 226 |
Its F39 Mark. And its mounted on a wall in a temperature controlled room at about70 degrees. Next time I go in ill check it in keylink.
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
Member
Joined: Oct 2001
Posts: 6,160 |
If your calls are ringing in to a UCD group, I'm going to want to know how you have them set up. You may have a timer or re-rout issue sending callers in a loop which will lock up when all ports are full. Especially if you have disconnect supervision issues as well. mark
|
|
|
|
Joined: Jan 2004
Posts: 226
Member
|
Member
Joined: Jan 2004
Posts: 226 |
I do have the lines programmed to ring a hunt group. Hunt group #6 (415). Also I have noticed that sometimes when I call, I get the AA and when I go to get transfered to a certain ext it just rings about 20 times and then goes back to the AA not the mailbox. I need to get back in there and check my parameters. Something hokey is goin on in there. Its 1 small building with 2 different tenants. Only 10 Phones. I followed the advice Comdial Tech support and kept then under 1 tenant and changed different ringing asignments, but now the time switching is getting hosed because 1 tenant is open on saturday and the other is closed. Now they are gripeing about the recordings. Sorry for flooding you with drama but its turing into a nightmare. Also I did not do the f39 upgrade. Would this matter? Thanks Bro.
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
Member
Joined: Oct 2001
Posts: 6,160 |
Comdial is trying to keep it simple for you.
2 tenents, different operating hours, you have to do it right.
For anyone else listening, it's best to set these senarios in your shop and test them.
If your running F39, your running F39, what do you mean you haven't "upgraded" yet? I'd bet you have programming issues. If you have a modem in it and you want support, I'll download it and take a look at what you have going on. Email me if you want help. If not, get back in the manual and set them up as 2 tenents, each with there own parameters. mark
|
|
|
|
Joined: Jan 2004
Posts: 226
Member
|
Member
Joined: Jan 2004
Posts: 226 |
Mark, the upgrade i was referring to is the voice mail upgrade. Although the upgrade is available, its not necessary to preform it as the system should still function correctly (at least this is what I was told). NO modem in it Mark, but i really appreciate your insight and the help you are offering. Im just going to go in there and set up 2 tenants and try a fresh database. I really appreciate your prompt responses and insight. Thanks buddy.
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
214
guests, and
71
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|