atcomsystems.ca/forum Forums TDM Business Telephone Systems Vodavi Telephones & Systems SBX IP 320

But don't the phones have an aux. port for the analog extension like Panasonic XDP's do?

Basically, it's just a matter of cross-connecting the second pair through to the digital station and using the paired analog station for whatever you feel like, correct?

Pointing out the rewiring of jacks is a good point Larry. As much as I hate it when people do that, it goes on all the time.

No. The SBX phones don't have the ADP jack. While I have not tried it, I believe that you cannot use the analog and digital of a port at the same time.

The analog phone works fine but shuts off as soon as you plug in the "paired" digital phone.

If the analog phone is talking to another station, as soon as you plug in the digital phone the call is put on hold. When you hang up the analog phone it rings back with the call. The digital phone doesn't sync up and it stays as an analog phone until you unplug and plug in the digital phone again.

It would be nice if they added paired ports to the software n the future.

Important:

When setting up the Custom Calling Tables you NEED to turn on DISA (on/off) in program 140 or the system won't accept any digits.

This seems to be only if you send the call directly to the CCR tree. If you send it to a phone and have the DISA ticked the CCR picks up right away. If I untick the DISA then the call rings to the station and forwards but I get the station 100 message. I'm going to try to figure out how to get the CCR greeting.

that's good to know! thanks..

Ok new question, I must be doing something simple but wrong. I have been trying to connect to the sbx with the admin and it will connect then shortly after tell me system disconnected abnormal disconnect. So what am I doing wrong. I've been going by the settings in the pdf files.

I just installed my second one! Had no problems connecting admin with IP. I'm still figuring out the programming!

Serial or IP. Hooked up my third today and had no issues with a crossover ethernet cable.

Man that programming is a learning curve.

Yep. Very comparable to the Telenium programming. Not WAY off from original Vodavi programming, but far enough to where I am already hearing resistance from the technicians.

We put in one (and have two others on contract), it works great and the customer loves it, but now we are being told that they are on back order for three weeks...is anyone else getting that?

Steve