To clear a Station 20 set DN
Plug in Line cord while holding down the "#" key
This will clear the stored DN and allow you to assign the correct DN to the set.
How do I re DN a Station 20 Phone
Enter new DN (ext) number then press #
A phone scaning the four buttons MSG DND Mute SPKR is requesting it's DN.
Avanti Phones do not require this.
Time Set for Telrad Digital 818, S60, 128, 400 and S1000
Enter from the time set station (usually the operator or boss’ phone)
Example: January 18, 2002, 2:00pm
Do Not Pickup the Receiver!!
Remember, this is just an example, use the actual date and time!
Press Feat 82
Then dial all in succession
Dial military time 1400
Dial day 18
Dial month 01
Dial year 02
Press spd/pgm†to save changes
Time Set for Telrad Analog 816 and 2464
Enter from the time set station (usually the operator or boss’ phone)
Example: January 18, 2002, 2:00 pm
Remember, this is just an example, use the actual date and time!
Press “SPKRâ€
Press the # key
Press the “time†button
Dial date 18 (2-digit date)
Dial month 01 (2-digit month)
Dial military time 1400
Press “TIMEâ€
Press “SPKRâ€
Can I make my own programming changes?
Yes, but you will need a connector made for the Telrad and the correct software for your system. Each system 818 (SBM), S60/128 (SB), 400 (DB) and 1000 (LB) have a specific software and several versions of each. After Release 7.36 thru the latest eda3.10 (E2E-3 IP) the Telrad EManager program can be used to program all of the Telrad systems as all IPeX and MPD2 processors are software and license upgradeable.