atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems Changing date at the RTC prompt

Sprung forward / fell back!!

For the telephonically impaired: If you check the postings from September, you'll find my note re changing the clock at the RTC prompt on the Utility Menu.

Well I got the time to change back then, this Daylight's Saving, I shot the date back, first a week, now two months. Aside from the ribbing regarding building a Telephone Time Machine, I'm going to have problems with VoiceMail retention.

The format for the time date change is:

MM HH DD MM YY (thanks to dtmf in September)

Are there any separators, or special characters in the string?

If I shoot in: 45 20 11 04 02
I an error message minutes hours date.

Thanks for your help! I'll post again in the Fall.

When I change the time in that prgm. just change the {month} and the (Hour) line the #'s up directly under the current time using the space bar for the blanks.
hope this helps and see ya next fall.

That worked like a charm!!!!

Balance is returned to the universe.

(I did have a large and vocal audience who couldn't believe that was the solution.)

Thanks again for the help, you guys are Great!

This old thread was a big help to me today preparing for this weekends time change.

Hope you didnt fail with the typo above?

Should be HH MM DD MM YY

Hours Minutes Day Month Year

And that goes for both, with the PCP programmer and by the timeset station (phone)