atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems 816 digital - setting the time.

Ive followed the steps below and set the time ok however when I enter the first digit for the date is beeps me no matter what digits I enter. Is there anything I need to do between steps 5 and 6?

1) Leave the handset on-hook.

2) Press the FEAT button.

3) Press the SPD/PROG button.

4) Press FEAT and dial 82.

5) Enter the time in the 24 hour clock format of HHMM. Use a leading 0 for single digit numbers.

6) Enter the date in the format DDMMYY using a leading 0 for single digit numbers.

7) Press SPD/PROG to save the settings.

Note: All 10 digits for the time and date must be entered. You can not skip any steps. To abort the time and date setting process press SPKR at any point before pressing SPD/PROG.

You have to set time at the station assigned
in the ADMIN to be the time setting station. Are you setting it from that station?

That did it. I didnt think to check that because it let me get so far in the programming. I did set the phone to be a setting station and thats all it needed. Thank you.

Any time, thats what we are here for.