web statisticsweb stats

Business Phone Systems

Support Service-Disabled Veterans!
Discount software from Direct Deals
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
Joined: Apr 2007
Posts: 1,439
Member
****
Member
****
Joined: Apr 2007
Posts: 1,439
I cannot break dialtone on all 16 ports of my analog card with DTMF. If I use pulse dial, it works.

I cannot even dial station to station, I think my DTMF receivers in the CPU are bad.

I have checked 10-09, 15-03. I have deleted the blade and re-added, I have replaced the blade, I have reset the pbx.

All my trunks are PRI and all my stations are IP, SIP or digital.

I have emailed NTAC my database, just looking for any other ideas.

D

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
RIP Moderator-Nisuko-Tie, General
*****
Offline
Joined: Jan 2004
Posts: 6,648
how are you testing ?

I often cant break dial tone with my butt set in tone but when I try a 2500 set it works fine .


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Apr 2007
Posts: 1,439
Member
****
Member
****
Joined: Apr 2007
Posts: 1,439
2 Different butt sets, the complaint is faxes (majority of my analog ports) can't dial out.

Customer just ported all their fax numbers to the existing PRI service from Time Warner (3 spans).

Giving me a headache.

I will try a standard analog phone, thanks.

D

Joined: Nov 2001
Posts: 1,640
Moderator-NEC
*****
Moderator-NEC
*****
Joined: Nov 2001
Posts: 1,640
If the DTMF receivers are bad you will still get dial tone but dialing wont break dial tone. It would be "tone deaf"

Joined: Jul 2005
Posts: 1,336
Member
*****
Member
*****
Joined: Jul 2005
Posts: 1,336
Does a reboot of the system fix it and is there a Zeacom on site??


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Joined: Mar 2003
Posts: 679
Member
Member
Joined: Mar 2003
Posts: 679
There are no per se DTMF recievers on the 8100/UX5000 systems they use DSP resources on the CPU. I suspect a glitch, Try Shutting down , pull the CPU and let it sit in the slot but not pligged in for about 5 min. so the caps will discharge.

There are some settings in 10-09 for allocating the dsp's but at default the first 8 are set for analog extensions, the next group 9-32 are for trunks, and the last group 33-160 are for extensions and trunks.

DJ

Joined: Apr 2007
Posts: 1,439
Member
****
Member
****
Joined: Apr 2007
Posts: 1,439
Quote
Originally posted by paulw:
Does a reboot of the system fix it and is there a Zeacom on site??
There is a Zeacom on site (is there something I should know??), but a shutdown/restart of the PBX does not clear the issue.

Going to site tonight @8pm to initialize the CPU and try with default database.

NTAC loaded my database and worked fine in ntheir lab... frown

D

Joined: Jul 2005
Posts: 1,336
Member
*****
Member
*****
Joined: Jul 2005
Posts: 1,336
Weell... back in the days of V3.XX we had a lot of this and only on Zeacom sites. The DTMF receivers resources would gradually vanish for some reason over a period of days to weeks. The only way to get them back on line was to reboot the 8100. This was supposed to have been sorted on R4.XX and later but as software loads are regional maybe something was missed in the US load..

Loading the database into the lab here I could never reproduce it..


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Joined: Apr 2007
Posts: 1,439
Member
****
Member
****
Joined: Apr 2007
Posts: 1,439
Well I have spent the last 2 hours futzing with this and here's where I'm at:

1. Power down/up = analog ports still cannot break dial tone with DTMF

2. Defaulting CPU (no netlink and no ucb) = analog ports function normally

3. re-loading original database with PcPro = analog ports go back to not breaking dialtone with DTMF

I really don't know what to do except perhaps open a new pc pro database and copy by hand from the original database and see where I get....

at a total loss...

D

Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
*****
Moderator-Mitel, NEC, Vodavi
*****
Joined: Jul 2001
Posts: 1,985
I think the answer is analog ports do not use ARS. Look at 14-06, route table 001, priority 1 should have your outbound trunk group. It is probably a 0 right now.

Page 1 of 3 1 2 3

Moderated by  ttech 

Link Copied to Clipboard
Newest Topics
1A2 key system A-Lead issue.
by Rupert - 10/29/24 09:01 PM
105A MOH
by John807 - 10/29/24 03:31 PM
How to repair Samsung OS 7100 Power Supply
by NateBates - 10/28/24 07:25 PM
Office serve 7030
by Dean Badelek - 10/26/24 03:56 AM
Forum Statistics
Forums84
Topics94,422
Posts639,464
Members49,818
Most Online5,661
May 23rd, 2018
Newest Members
AndyW251, Dean Badelek, PCCsup, spoonmagician, Eddie5
49,818 Registered Users
Top Posters(30 Days)
Toner 7
R4+Z 4
pvj 3
Eddie5 2
Who's Online Now
3 members (Touch Tone Tommy, Professor Shadow, nortelvoip), 247 guests, and 161 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2024
Powered by UBB.threads™ PHP Forum Software 8.0.0