|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
I have the Electra Pro Lvl 1 system installed in my home (office) with 6 extensions/phones, one of which was recently added. Actually, it was split off of a 25 wire cable by a NEC technician.
Unfortunately the new phone does not ring at all. Calls can be placed and received, but no ringing.
I have a combination of ETW-8-1 and ETW-8-2 phones, none with display...
How do I program the system for this new phone to ring, without knowing which extension was added? The NEC tech told me I have to get a display phone before he can do anything.
I am not a phone person, so please explain taking that into consideration.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
He was Right You Have to have a Display Phone to Program The System Day Ring. To Find out the Ext Number Have someone by the New Phone and start calling ext Numbers starting with 10 till you get to the new Phone. Rember the MIC. light must be on to handsfree answerback to turn it on Press FNC and Dial 1 on keypad. this turns it on and off.
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
Once I have the extension, Rickman, do I need a display phone?
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
Yes, You Need to See were you are when your in Programm Mode.You can buy a Etw-8-2D from the Net, not very Expensive.
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
I found a ETW-16DC-1 (seems like . Can't find the ETW-8-2D anywhere. Will this work?
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
Yes, but only the First 8 Lines will work.
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
Thanks. Will have to wait for it to arrive...
|
|
|
|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
Found out the extension: 16. The display phone should be here by next Monday 2/1. Then maybe you can tell me how to program the The System Day Ring?
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
Ok, here I go. The first part of the instructions are just fine (To get into Programming Mode, Plug the Display Phone into Station 10 or 11, Press FNC, Hold, and dial xxxxx. Do this with the Handset down. The Display will show “Program Modeâ€Â, Press Line Key 4, The Display will show ; ...) Rather than what you mentioned, the display shows 01/01:SLT NO
Below it it shows the time (which is incorrect but that is beside the point right now.) The second "0" is blinking (the one that indicates the item number.) Not sure how to get that to 15, the day ring. Can't see the 123456, but I presume that is reserved for the day ring setting. Could you check again and possibly let me know how to get to 15?
[Edited by Keighlar to remove Programming level password. Please do not post passwords in the open forum. Thank you for your understanding.]
|
|
|
|
Forums84
Topics94,422
Posts639,464
Members49,818
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
381
guests, and
516
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
