|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
Hi,
Im wondering what features i can get for my Merlin 410 PBX when a Feature Pack 1 is added.
thanks ahead of time.
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
5 party conference call On hook dialing Call transfer Hold reminder Group listening Can prevent outgoing calls on specific phones Privacy Automatic outside and intercom dialing Last number redial Automatic line selection Do not Disturb Ringing options
So, you found yourself a Merlin??
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
yep. its a 410 PBX with 8 10 button HFAI/Mic phones. with FP1. ~have to buy the phones seperatly tho. wish i could find 'em cheaper. its ummmm. $35 for the 8 phones and $35 for the system. guess i cant complain too much.
[This message has been edited by topher (edited July 08, 2005).]
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
No, not at all. Sure, you're not getting the latest and greatest. But for a circa 1984 system, it's nice.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
well i still see them in use, so they have to be good, but it looks nice. So... how are these systems connected to A/C power? is it by a computer power cord? (3 prong grounded) it doesnt come with the power cord.
[This message has been edited by topher (edited July 08, 2005).]
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Yup, just a three pronged computer cord. I did forget to mention one thing, that I should have. You do realize that the "voice terminals" do not connect to the KSU with standard plugs, right? Merlins use 8 pin "RJ45" cords, in a 568B wiring scheme. So, in theory, you could use network patch cables (straight-thru, not crossover). Or, you could go the cheaper route, buy some un-crimped cable, 8 pin plugs, borrow a crimper, and make your own cables.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
oh, no i didnt notice that. the picture looks like a RJ-11 tho. im not sure how to post a picture on this post but... here is the picture on this site: https://merlinsystem.bravehost.com/ ***look at the bottom too. LOL.***
Kristopher
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
The jacks 1-19 are your stations and u can use the cables mentioned above.
the a-b-c-d are your co lines and are rj11 and use the 4 pin plugs .
You can run it on your bench with 568 jumpers sta to contol unit and plug in a phone line to a or b ,etc.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
ok well kenb i understand that 10-19 are my stations and that abcd are the lines... and im guessing the phones have rj-11 connectors to go to the control unit. i guess now i want to know this: i have rj-45 cables, and i have rj-11 cables, is there some kind of mid-line coupler or such that will convert the rj designation? or do i have to go with either the patch panel or buying my own cable and crimping it? i am trying to go as cheap as possible here.
Kristopher
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
No the merlin phones have female 568 if you will so if you take a 568 premade jumper cable and plug one end in control unit and one in set it will work Again rj11 into a-b-c-d for lines
merlins use 8 wires
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
well to tell you the truth, i dont really want to go thru all the trouble of finding the right cords and such so...can someone recommend a system with all standard telephone jacks, no amphenols or anything??? i basically want: party conference call On hook dialing Call transfer Hold reminder Privacy Paging thru phones Last number redial Automatic line selection Do not Disturb Ringing options Hold
thanks
[This message has been edited by topher (edited July 08, 2005).]
Kristopher
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
yes reread codasco 704 note above
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Yeah, just use network cables (they'd actually be nicer than phone cables since they're CAT5 instead of CAT3). Or, make your own...it would be helpful to borrow a crimper though, since they are expensive just to use for one project.
Also, if you wind up with a system with amp connectors, there are break out boxes/adaptors you can use instead of punchdown blocks (although punch down blocks and impact tools aren't taht bad oncce you get the hang of it.....if you need a punchdown tool I;ve got one you can have)
If you decide you actually don't want the Merlin, I will gladly trade you my Vodavi Starplus system (12 lines, 24 extensions) with 3 keysets and a 2 station single line adaptor) for the Merlin. (I got one, but it has no sets. and it's only a 206, not a 410)
[This message has been edited by codasco704 (edited July 08, 2005).]
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
alright, im going to check with alocal supplier about the cabling and stuff. if i dont find anything ill send you the merlin. i have found a Norstar 6*16 too, but im just wondering what connectors it uses?
Kristopher
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
I use a 410 to keep my PC up off the floor
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
LMAO ...ok.. well im still wondering what connectors the norstar 6*16 uses
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Some people laught at the old Merlins, but honestly, for home, simple/old is OK for me....of course part of my problem is the desire to try all kinds of different systems. I've had an Executech, Norstar, Pana DBS, Partner, and Starplus in my home, just since about 2000. I've come to realize that some of them (esp. the DBS(96 ports, for a house!) and the Partner (hunt groups, voicemail) were overkill. Even the Vodavi does more than I need. They were all nice, but I really don't need anything more than a Merlin. I have a 206, but could use a little more capacity.
The "compact", non ICS norstars (the 308 and 616) both use modular connections for co lines, and an amp connector for sets, MOH, loudspeaker, and aux. ringing. I really liked my Norstar system, and it's the closest system in reliability and toughness (well, the sets at least, the KSU is poorly made in my opinion) to Merlin. Make sure you're getting one with DR5 software, and if you sare ever going to consider voicemail, get a KSU with disconnect supervision.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
whats the difference between DR5 and any other? the guy says that he doesnt know how to tell the software version but it was manufactured in '91. im not sure if just that unit and some norstar phones will let me do all the things i want it too will it? its a 616 PBX the only features listed is paging and transfer but says it supports all phones... does this mean that i can page thru the speakerphones on all the phones, hold, exlusive hold, xfer, hold reminder????? thanks a bunch.
Kristopher
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
by the way its a refurb......where do i get a break out box/adapter cheap?
[This message has been edited by topher (edited July 09, 2005).]
Kristopher
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
Member
Joined: Mar 2001
Posts: 3,268 |
Pay attention to what codasco says---DR5 is the safest way to go. DS KSU is best if you ever want a VM. DR 1, I think, was only a 308. Don't be foolish.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
well the guy doesnt know the software version so how the heck am i supposed to know? im not trying to be foolish it is listed on ebay and it barely says a thing...
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
I don't remember the exact wording, but if you open the cabinet up there is a removeable cartridge should should say the sw version somewhere on it. If it's really cheap, it's probably an older system..DR 2 or 3 maybe. If, on the off chance it is it is DR1 (which it sounds like the 616 wasn't made in DR1), stay away. DR1 doesn't do much...I seem to remember that it doesn't even do quite as much as an FP1 Merlin did (if you do get a Merlin, do yourself a favor and buy FP2)
You might acutally have trouble finding an adaptor. I've looked and looked, and the only harmonica adaptors/breakout boxes I've found have two pair jacks, and Norstar only uses one pair per set.
[This message has been edited by codasco704 (edited July 09, 2005).]
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
thanks a bunch codasco, i told him where to find it and am awaiting a reply. do the norstars short out if they have wiring with more than one pair? i was told by a frontier tech here that i should use 3-pair (6p6c) wiring just to make sure everything would run right.
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Huh?!?! No, only one pair per set. One pair=one DN (extension). If you run more than one pair, you will physically be running more than one port to the set. The Frontier tech must have musunderstood. The only system that I know of that needs all three pairs is the InterTel ESP.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
ok so i need to get a reply from that guy and see if it is DR5 and i need to look for a break out box/ adapter that uses only one pair. by the way thanks A BUNCH for your great help.
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
When your looking for the adaptor, it might help to know that they're actually called harmoica adaptors. And if you can't find an adpator, don't let that turn you off to the system. Punching wires down on a 66 block is the "real:" way of doing it...unless you have a Merlin!
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
i found this.....i will have 3-4 phones on my system total.. the price doesnt thrill me but thought i would ask. https://www.phonegeeks.com/versablock.html thanks [This message has been edited by topher (edited July 09, 2005).]
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Not exactly, but that will work....Ablecomm is very very expensive...and I haven't had the best of luck with them.
|
|
|
|
Joined: May 2002
Posts: 17,725 Likes: 18
Member
|
Member
Joined: May 2002
Posts: 17,725 Likes: 18 |
You'd want the male if plugging into an existing cable. The one you're pointing out would have 2 pairs for each jack.
Retired phone dude
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Which would only sort of work. You'd have to make sure you use only one pair cabling to each set, and you'd loose half of the capacity of the system..AND, your extensions would skip (21, 23, 25, instead of 21, 22, 23). They can be renumbered, but it's sort of a pain for such a small system,
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
i wouldnt mind if they skipped. i will have everything speed dialed by key anyway..... the one that i pointed out (the harmonica) says RJ-11, if im not mistaken (but probably am) its a 6 position 2 conductor (1 pair).
i got a reply.. the cartridge on the system says as follows....
Cartridge is labeled as follows (NO DR#)
02 NT5B10CA 0400279003 Warranty Expiration Aug 2001 Capacity 6 x 16
is this DR5?
[This message has been edited by topher (edited July 10, 2005).]
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
I forgot how to read the labels, but i THINK that it's a DR2 (that's what the 02 stands for). Someone correct me if I'm wrong. I don't think that harmonica adaptor is what you're looking for (it says its a 6x4, so 4, six conductor jacks). I'd say keep looking. I found this: https://www.phonegeeks.com/noname1.htm but it's $108! I also tried this: https://www.phonegeeks.com/25pairbreakb1.html one time (select 5, 1 pair jacks from the drop down menu), but they got things mixed up and I never wound up with a 1 pair adaptor, just a 2 pair adaptor for 1A2 systems (not much help for the CO jack on my Starplus). [This message has been edited by codasco704 (edited July 10, 2005).] [This message has been edited by codasco704 (edited July 10, 2005).]
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
I searched the part number, and it's acutally a DR1 cartridge.
You can buy a DR5 cartridge, but if you're dealing over ebay, it might be cheaper to buy a KSU that comes with DR5. (A seperate cartridge will be, at the very least $100 from a chaper online source)
[This message has been edited by codasco704 (edited July 10, 2005).]
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
thanks soooooo much. i will be back on the board on tuesday so i will keep looking because i dont want to get a DR1.
Kristopher
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
alright.... im back on the board. the 25-pair break out box on phonegeeks.com wouldnt be bad... i am still looking for a good norstar system that runs pretty cheap. i already have some phones picked out, they are M7310's. i am talking to a seller about getting DR5 software with one of his units..... (still waiting for a call.)
by the way thanks a lot!! especially codasco704!!!
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
No problem!
The M7310's are a good choice. The M7208's don't have enough buttons, and the M7324's have too many. The newer T models aren't as sturdy either.
If you had talked to me about 6 months ago I could have sold you a 3x8 DR%. Oh well. I just realized that it was really dumb for me to buy that merlin system. So now I'm going to have to sell the Vodavi....hopefully I'll make some money on it though, the Merlin was underpriced.
|
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
Why dont you just hire so meone to put it in the right way. for the amount to buy one of those silly pre-made blocks a real phone man can give you close to an hour of labor.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
yeah it would've been good to have talked to ya 6 months ago... geez these nortel prices are wild... i found a meridian with some M7310's with it for about $100 but thought i would ask, how bout them meridians? are they any good? can i use norstar phones? i found one that looks like a box with jacks in the back no amphenol connectors at all but it looks like they are all RJ-45 connectors. i have no clue where to look for a software version, or if the meridians even have a different software cartridge. the system has a label on it that wasys wellfleet communications. im open for any comments...
Kristopher
|
|
|
|
Joined: Jun 2002
Posts: 435
Member
|
Member
Joined: Jun 2002
Posts: 435 |
Meridian and Norstar are completely different systems (though sometimes Norstar is referred to as Meridian Norstar). Meridian is a full blown PBX system, which will obviously cost you much much much more than a Norstar, not to mention far more complex. Only phones compatible with Norstar are the M7 and T7 model phones. M2 and others are only for Meridian PBX's.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
Member
Joined: May 2005
Posts: 1,106 |
alright.... thanks. that was what was confuzing me... everything said MERIDIAN/NORSTAR...
Kristopher
|
|
|
Forums84
Topics94,395
Posts639,309
Members49,804
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Yoda),
247
guests, and
464
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|