|
|
|
|
Joined: Feb 2011
Posts: 4
Member
|
|
Member
Joined: Feb 2011
Posts: 4 |
I need some help/direction in programming via DB Studio an IP phone. I have the licensing installed, I just need a little direction getting the programming done in the switch and on the phone. Any help would be greatly appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
What kind of system do you have? An Axxess or a 5000?
|
|
|
|
|
Joined: Feb 2011
Posts: 4
Member
|
|
Member
Joined: Feb 2011
Posts: 4 |
|
|
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
If you are not familiar with the programming on the Axxess system I would highly recommend getting your vendor involved. The steps are easy once you know what you are doing but there are quite a few to get the IP Phones going. You have to do programming on the Axxess itself as well as on the IP Phone in most cases.
|
|
|
|
|
Joined: Feb 2011
Posts: 4
Member
|
|
Member
Joined: Feb 2011
Posts: 4 |
Thanks for the information. I was able to resolve the issue with a little digging and patience.
|
|
|
|
Forums84
Topics94,457
Posts639,629
Members49,824
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
26
guests, and
59
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
