Nortel BCM 50FE-12T PWR Business Ethernet Switch (NT5S00A)

Products from our Sponsors

Print Thread

Rate Thread

Nortel BCM 50FE-12T PWR Business Ethernet Switch (NT5S00A) #641012 06/03/21 05:54 AM
Joined: Feb 2010 Posts: 505 Likes: 1 Boston teldata1 Member
teldata1 Member Joined: Feb 2010 Posts: 505 Likes: 1 Boston	Does any know what the difference between using this Nortel Part as opposed to a Poe switch Had a problem yesterday at a site with BCM50 and this devise seemed to be the culprit I was able to use a Poe switch to get the IP phones to come back up

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Nortel BCM 50FE-12T PWR Business Ethernet Switch (NT5S00A) teldata1 #641019 06/03/21 05:06 PM
Joined: Feb 2005 Posts: 1,615 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Toronto, Canada	"difference between using this Nortel Part as opposed to a Poe switch" Your question does not make sense since the BCM50FE-12 (or 24) device IS a PoE switch. If the system was to have defaulted then you would have to re-enable the ports for PoE. You can use BEM software to program them. Did you by chance try another PS for the BCM50FE-12? I am guessing no, since they differ from the BCM/Exps cabinets we do not exactly have those lying around. Mini 4 way/pin DIN Power Supply 48v 2.7A =---()))))))))---= www.curlycord.com Toronto, Canada