|
Joined: Apr 2005
Posts: 304 Likes: 1
Member
|
Member
Joined: Apr 2005
Posts: 304 Likes: 1 |
I still service half a dozen ZTDs, a couple ZTSs and a smattering of Omegas IIIs and IVs. They did in fact use the wht/or pair for T/R audio, with the wht/bl used as a bypass pair and wht/gn for DC voltage. I even have a 412 and one solitary 128, which I am proud to say, was recently converted from coal to regular house current. Wow - you've got more vintage systems than we do! I'll admit I don't know what the 128 is. We did an inventory earlier this year and don't recall coming across 128 parts and phones. I'll ask if we ever had any. In 2018 we replaced an Omega III with an Adix. I have a modified 1A2 system at home. I've replaced 400E lines cards with my own circuits so standard non-1A2 phones can initiate off hook lamps and hold. One of the IDFs is a 66 block behind the living room couch. The system was handy when everyone was living here - at dinnertime pressed 0 on the intercom to page throughout the house. Next time the customer runs into the trouble of not being able to connect I'll keep re-installing the Icon Programmer in mind. I'll see if it could be installed on a second PC. This particular system was not installed by us. It was offered to us to service after another company took it over but had no Iwatsu experience. For a couple months I've had a 5910 at home connected to our office system, and a Grandstream phone to our hosted system. The 5900 is a great IP phone IMO. Actually I think most Iwatsu phones/systems were. We sent several 5900 series phones out to customer's homes with POE adapters in the last few months that were fortunate to have an ECS with an MBU.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2006
Posts: 1,805 Likes: 11
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,805 Likes: 11 |
All of the older systems were pretty hardy rigs. It's lack of repair parts that gets most of them replaced these days. That said, programming some of them was kind of difficult at time. Some of the steps were convoluted and didn't make a lot of sense. Other areas were almost automatic. Some systems supported display phones, so programming info was easily read, while other systems, like an Omega III utility version, required the reading and interpretation of LEDs on the master phone. If you understood binary coded octal, it was a breeze. Iwatsu/ICON is really good equipment. It's too bad development has stopped on the ECS.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Aug 2004
Posts: 9,169 Likes: 18
Admin
|
Admin
Joined: Aug 2004
Posts: 9,169 Likes: 18 |
Trying to remember way back then but didn't the 128 get programmed with a SPRG programming module?
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
oh, the number of Omega III and IVs we scrapped...I remember an ITT 3100 in the dumpster too!
Jeff Moss Moss Communications Computer Repair-Networking-Cabling MBSWWYPBX, JGAE
|
|
|
|
Joined: Aug 2006
Posts: 1,805 Likes: 11
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,805 Likes: 11 |
Yep..the program setting box. Bunch of rocker switches that would drive you to drink within minutes.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Apr 2005
Posts: 304 Likes: 1
Member
|
Member
Joined: Apr 2005
Posts: 304 Likes: 1 |
Wow I never knew the Omega III was even programmable! I was at a Samsung DCS service call today which is programmed from a phone. Entering a name is like texting on a flip cell phone.
Going to the site tomorrow that was an Omega III that went to an Adix 2 years ago. Their 3rd CO line has a hum and any pages can be heard very clearly on that line. I advised them for now assume any pages could potentially be heard by those that are using the outside lines.
|
|
|
|
Joined: Apr 2005
Posts: 304 Likes: 1
Member
|
Member
Joined: Apr 2005
Posts: 304 Likes: 1 |
Speaking of the Omega III - had a service call on one (our only) yesterday. There was one employee there sine 1980, she believed the system was installed in 1983 like I guessed.
A phone was going dead - no lights. The customer would reset it, and it would work for a while. I replaced the line cord which was in very bad shape, but that probably was not a factor. Went through some spare phones they had, designated two as good spares. I never really worked on the KSU itself, don't know if a bad line card or SUB, whatever it's called could be going bad. We still have some parts in the shop. They have a service contract with us. What we'd like to do is tell them we will replace the system with an Adix and 24 button Gen 2 or 3 phones at no cost to them.
I showed one of the owners one of those phones about a year ago. Amazingly, she seemed somewhat receptive to it. They are very old school, they what what's called 'The Rolodex' - a huge mechanical motor driven Rolodex with paperwork. We wouldn't even mentioned a hosted VoIP system to them.
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
can you show a pic of the Omega III phone?
Jeff Moss Moss Communications Computer Repair-Networking-Cabling MBSWWYPBX, JGAE
|
|
|
|
Joined: Feb 2015
Posts: 472 Likes: 6
Administrator
|
Administrator
Joined: Feb 2015
Posts: 472 Likes: 6 |
In looking through the manual it appears that the Browser Programming was released back in the Windows XP days and operates up to Windows 7.
Is it possible that there might be a Microsoft update that might me interfering with the connection? I know a lot of laptops that worked great connecting divices to the XP environment and wouldn't with OS's beyond XP or Windows 7. Don't know if that's you case.
Regarding Editing: Editing is only allow for a certain amount of time, not indefinitely. I am not a expert on the phone systems But: I can say that they probably have a issue with SMB versions if using a new pc to interface to a old system. With say windows 10 the smb version default is now smbv2. Older devices used smbv1 to communicate. Unless you are setup for nsf communications. https://www.gigxp.com/smb-vs-nfs-vs-iscsi/To get that back on a win 10 pc it is easy and will work side by side with smb2. On the PC goto https://www.windowscentral.com/how-access-files-network-devices-using-smbv1-windows-10Follow the directions. Then try again. Don't enable the self delete. Or the next windows update will turn it off again. Or if you don't use it for 30 days it may uninstall again. You probably will need to reboot the pc for the change to take effect
Last edited by Ruben; 06/21/20 04:34 PM. Reason: Added Comment
There is no such thing as stupid questions. Just stupid answers.
|
|
|
|
Joined: Apr 2005
Posts: 304 Likes: 1
Member
|
Member
Joined: Apr 2005
Posts: 304 Likes: 1 |
I'll make note of these steps, thanks.
|
|
|
Forums84
Topics94,457
Posts639,628
Members49,824
|
Most Online5,661 May 23rd, 2018
|
|
2 members (justbill, eos90066),
327
guests, and
70
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|