atcomsystems.ca/forum Forums Other TDM Phone Systems Sprint - Tadiran Telephones & Systems Flexicall and CID

Interesting, so if you change the trkgp to unavailable or omit Flexicall won't work?

Tried them both-- I got fast busy. So I put it back to SITE_LDN.
Same scenario: Only CF-ALL will forward an external caller to an external tel #.

That's weird. BTW who is the carrier so I can avoid them like the plague. Tadiran pretty much wrote the book on Q9.31.

Carrier is ATLANTECH ONLINE, based in Silver Spring MD. I don't think they service outside the greater DC area.

Anyway, staff here will make do-- they just have to remember to press CF-ALL button on their phone when they are out of the office.

If I discover anything else- I'll be sure to post here. Thanks again for all your insight and expertise!

p.s. I assume there is nothing else to check in terms of how the Tadiran differentiates between CF-ALL calls vs. Flexicall calls?

No, not really unless you look at timers. There are some carrier settings you can play with in the LCR section, but I wouldn't if you aren't certified.

Re. timers- I know that Flexicall gets plenty of rings (like 8-10) before the WiCMC voice-mail picks up. I don't think that the Flexicall call is routed to the PSTN at all.

Regardless, given our situation-- is it possible to hire your company to dial in and see if you can help me figure this out? That is, if you think its solvable. :confused:
My work phone is 301 998 0432

Just want to give a public THANK YOU to CORAL TECH who dialed in-- and appears to have fixed it!!!

So Tell us, what was it?

There were a couple of things changed. I know under SFE, he did the following:

**SEND_SOURCE_CALLER_ID_TO_FREEDOM_(FLEXICALL)_DEST(Y/N) Y
**DEFAULT_SECOND_ALI (Number/Rem) - {put btn here}

CoralTech can elaborate I'm sure.

Thanks dcc1234, that was pretty much the setting.