|
|
Joined: Feb 2005
Posts: 12,348 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,348 Likes: 4 |
Didn't think you implied anything. Just pointing out where it originated. It is a good policy. We here in the states have been banning lead in plumbing since I think 1994. Lead-free solder for everything soldered on potable water and waste lines. Brass fittings and plumbing items like faucets containing lead are banned.
Now we only get lead in our bodies from whatever the Chinese send us.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 5,722
Member
|
|
Member
Joined: Dec 2004
Posts: 5,722 |
Cat 6, if you run a ground to each lamp you now have a 565...not a 564. The lamp ground common is so the spare pairs can be used for other things ... like making a ten button set work on a 25 pair cable (three pair per line, eight lines plus hold and ICM = 10 buttons).
Ken
---------
|
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
I solder a ton of audio cables and I don't think I have gone crazy (yet)!
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: Nov 2008
Posts: 227
Member
|
|
Member
Joined: Nov 2008
Posts: 227 |
What the Chinese send us...which has become pretty much everything! (sigh) 565 eh? Great! An upgrade! 
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
No, actually a downgrade. At least that is the way I would see it. I believe the 565 was released to replace the dying and 'old fashioned' phones on systems that were originally installed with individual lamp grounds and A leads. As for sodder, ever'body knows that ever'thing 'eelectronical' runs on smoke. When the smoke gets out thru a hole, the dang thing quits. All them reepare guys do iz blow sigareet smoke back in da hole and sodder it shut!  John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Nov 2008
Posts: 227
Member
|
|
Member
Joined: Nov 2008
Posts: 227 |
But according to KLD, it was the 565 that had the individual lamp grounds. My 564 had one lamp ground for all 6 lamps.
Anyhow, I just finished wiring the new amp connector cable to the phone. I wired it in 565 format, with an individual ground for each lamp.
Easier then soldering the old amp connector back on!? Uhhhh....no, definetly a no on that one. It was borderline neuro-surgery.
|
|
|
|
|
Joined: Nov 2008
Posts: 227
Member
|
|
Member
Joined: Nov 2008
Posts: 227 |
Oops! Just realised the spelling mistake on my signature line!
|
|
|
|
|
Joined: Nov 2008
Posts: 227
Member
|
|
Member
Joined: Nov 2008
Posts: 227 |
It took an especially long time because I did not crimp the ends. I wrapped the stripped wire around each individual screw.
I'm sure it would have been much easier if I had stuck a fork head crimp on each wire tip, but I don't know how to crimp 24 AWG wire, nor do I have the tools.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Never mind how to get it done, try to find some 'fork head crimps'. I assume you are referring to what we call spade lugs. Those small ones are TOUGH to find. Haven't looked for them in 10 years, and they were scarcer than a clean teenagers room then! John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Nov 2008
Posts: 227
Member
|
|
Member
Joined: Nov 2008
Posts: 227 |
It's done already. Now I'm just waiting for my KSU, and I'm in business.
|
|
|
|
Forums84
Topics94,457
Posts639,629
Members49,824
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (MooreTel),
67
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
