|
Joined: Sep 2005
Posts: 9,287 Likes: 8
Admin
|
Admin
Joined: Sep 2005
Posts: 9,287 Likes: 8 |
OK so do you hear the noise on zone 2 and 3 but not zone 1?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2012
Posts: 20
Member
|
Member
Joined: May 2012
Posts: 20 |
Yes. I have removed all but 1 zone and move it to the other zones. Ceiling speakers make the noise on any of the zones. Bull horns do not.
Fun huh? If I had longer hair I would be pulling it out.
Jason
|
|
|
|
Joined: Sep 2005
Posts: 9,287 Likes: 8
Admin
|
Admin
Joined: Sep 2005
Posts: 9,287 Likes: 8 |
If I got this correct you have removed the audio pair from the speaker, replaced the power cable, the 2003 controller, the power supply and connected it to another AC source but you still get the noise.
Double check all the wiring and make sure something didn't get crossed up in all the changes. Connect a horn to the same circuit as the ceiling speakers and see if it makes the noise. Does noise volume change with the speaker volume control?
|
|
|
|
Joined: May 2012
Posts: 20
Member
|
Member
Joined: May 2012
Posts: 20 |
I just finished grounding the extra pairs of wires in the cat 5 cables as Bill suggested. Going to give it a day or so to see if this has helped.
Volume does change the noise level.
At one time I have connected all the speakers to the same zone. Ceiling speakers made the noise but the bull horns did not.
Jason
|
|
|
|
Joined: Sep 2005
Posts: 9,287 Likes: 8
Admin
|
Admin
Joined: Sep 2005
Posts: 9,287 Likes: 8 |
Could it be RF that the ceiling speaker amps are sensitive to but horn amps not?
|
|
|
|
Joined: Jan 2010
Posts: 217
Member
|
Member
Joined: Jan 2010
Posts: 217 |
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Merritt, if the building is 'Red Iron' construction and poorly grounded,that would certainly explain it.
Suga Ray Jay, try turning all the speakers down 10 degrees on their potentiometers. Hardly any drop in perceived audio level, but that last 10 degrees REALLY opens up the gain and input sensitivity.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: May 2012
Posts: 20
Member
|
Member
Joined: May 2012
Posts: 20 |
Grounding the cat 5 cables did not work. Seems everything I'm doing is helping, but just not fixing it.
Lightninghorse, Are you referring to the master volume on the 2003A or each individual speaker? Again this system has been working well since 2001 with out any problems so I'm not sure red iron is a factor. But I'm willing to try anything.
Jason
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
I'm willing to try anything. you've replaced a bunch of stuff ($$$) spent a lot of time and are getting nowhere . why not call in a pro ? I would
Skip ------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Joined: Oct 2010
Posts: 250
Member
|
Member
Joined: Oct 2010
Posts: 250 |
We used to run shielded single pair to the ceiling speakers because you never knew how close they would come to who knows what type of electrical devices or circuitry. We would terminate them on a 66 block equipped with a ground strap terminated at building ground. We then would take the shields and terminate them only on the 66 block ground strap.
Forty six years and still fascinated with Telecommunications!
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
|
|