|
|
Joined: Feb 2005
Posts: 12,347 Likes: 4
Member
|
Member
Joined: Feb 2005
Posts: 12,347 Likes: 4 |
Huh, now you made me look at the manual and you are absolutely right, that is what it says but it's in the text of the instructions, not in the specs. Thing is though they have "Class 1 wiring must be used" printed next to the outputs and that's what everybody sees. Nothing about only with bridged mono.
I suppose if it became an issue you could drag out the manual but according to the NEC it has to explicitly say that you can use CL2 (or CL3) wiring and I am not seeing that. The rule according to the NEC is that the wiring requirement must be printed on the unit and if it says nothing you have to assume Class 1. In this case Crown only says in the manual that you have to use Class 1 if you configure the amp in bridged mono where the outputs will be more than 100v. They don't say what the wiring requirement is for 70.7v. So because they say nothing we are back to Class 1 and that's what it says on the back panel so what's an inspector going to think even if you show him the manual?
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2007
Posts: 6,808 Likes: 18
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,808 Likes: 18 |
Like Hal said: "Article 640.9 (C)Output Wiring and Listing of Amplifiers. Amplifiers with output circuits carrying audio program signals shall be permitted to employ Class 1, Class 2, or Class 3 wiring where the amplifier is listed and marked for use with the specific class of wiring method."
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
So Jeff, time to buy a sheet of rub-on alphabet! ![smile smile](/forum/images/graemlins/default/smile.gif)
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|