|
Joined: Feb 2009
Posts: 14
Member
|
Member
Joined: Feb 2009
Posts: 14 |
We have an Iwatsu ADIM-X with the voicemail card installed. The VMI System Editor v3.02.13 is used to edit the voicemail programming. We use the Iwatsu Programmer v5.0.3162 for the Adix box.
We are experiencing an odd problem getting the "Call Statistics" window to retrieve the data from the ADIX box (Port usage, Simultaneous port usage and Detail.) For several weeks the VMI editor retrieved the data OK for the previous day(s) but suddenly one day it says "None found" after it tries to retrieve the System Statistics.
The first time this happened I was still tweaking the phone system and voicemail and thought I must have changed something to cause the problem. Two weeks later it suddenly started working again, and I didn't think I had changed anything to make it work again.
Three weeks ago, it stopped retrieving the data again and this time I know I didn't make any changes in either the phone system or voicemail system. Three weeks later I still cannot bring up call statistics.
Is this a known issue for the ADIX voicemail card or the VMI editor? I can get the current "System Status" just fine and see the Recent Calls, Mailboxes and General live status.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2006
Posts: 1,805 Likes: 11
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,805 Likes: 11 |
Check your setting for background transfers in the customer's profile. Background transfers must be enabled for a lot of stuff to download properly.
Also, are you selecting an appropriate and valid range to view?
[Edited for atrocious spelling]
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Feb 2009
Posts: 14
Member
|
Member
Joined: Feb 2009
Posts: 14 |
The Performance tab in Properties does NOT have the "Disble background data transfers" checked, so I assume the background transfers are working, correct? In the same tab "Use streaming mode" is enabled, though grayed out.
When VMI is launched I see "Transmisison in progress" continually in the status bar.
The range I specify is the same one that I had been using before - usually the Beginning of Day and End of Day for the previous date.
At one point when I tried it again it displayed the "Data is being received and processed" for about 35 seconds - thought it was working again but still no data.
I do get current data from System Status Mailboxes window, and data from Recent Calls window.
|
|
|
|
Joined: Aug 2006
Posts: 1,805 Likes: 11
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,805 Likes: 11 |
Are you trying to connect on site or remotely?
Which version of VMI- the card itself- are you using?
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Feb 2009
Posts: 14
Member
|
Member
Joined: Feb 2009
Posts: 14 |
It is a direct connection on site.
I believe the card version is ... 8.0? How can I confirm that? The card is an 8-port IX-4EVML one.
|
|
|
|
Joined: Aug 2006
Posts: 1,805 Likes: 11
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,805 Likes: 11 |
After you connect, view the Status tab. Along the top is a listing of the currently installed specs.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Feb 2009
Posts: 14
Member
|
Member
Joined: Feb 2009
Posts: 14 |
Found it: Product Number: IX_4VML OS Revision: 06.00.137 Script Revision: 2.02.12 VMA Revision: 02.99.208
|
|
|
|
Joined: Aug 2006
Posts: 1,805 Likes: 11
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,805 Likes: 11 |
Generally, any problems you encounter when trying to collect or send data when using the VMI are the result of a less than perfect connection. There are now 3 different flavors of the VMI, and the current programmer was made to access all of them, but you have to tell the programmer which type you are connected to. If you edit the customer profile, there is a radio button to 'Create a New Control File'. By default, this is usually set to type 1, which works great for the older VMI cards. Try creating a new profile for the customer, but choose the Version 2 file type and give it a try. Having the incorrect file type selected can sometimes cause some real goofy problems.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Feb 2009
Posts: 14
Member
|
Member
Joined: Feb 2009
Posts: 14 |
I created a new control file, version 2. The stats still didn't download.
I tried changing the connection type to Manual rather than LAN, clicked APPLY then changed it back to LAN. Exited VMI and launched it again.
After that I tried grabbing the stats and it downloaded the stats day by day, from 02/20/2009 - 03/04/2009. I left the server room for about 10 minutes to look at a printer problem and when I returned I could not retrieve any stats, even from the days that I had just downloaded them 15 minutes before.
I am going to try connecting the phone system to a different computer and see how that goes. Other than me leaving the room nothing was changed from the time I could download the stats and when I could not...
I also reseated the cables - no change on issue - just doesn't make any sense!
|
|
|
|
Joined: Feb 2009
Posts: 14
Member
|
Member
Joined: Feb 2009
Posts: 14 |
Forgot something I noticed. In help file it states that the stats.cc file is 3.4 MB for IX-4VML and 685 KB for VS-VML.
My stats.cc file is 685 KB. My card is an IX-4VML one. Why isn't the stats.cc 3.4 MB? Where is that determined in the VMI editor?
|
|
|
Forums84
Topics94,457
Posts639,629
Members49,824
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
212
guests, and
50
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|