web statisticsweb stats

Business Phone Systems

Products from our Sponsors
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#463849 01/28/08 10:46 AM
Joined: Jan 2008
Posts: 3
Member
Member
Offline
Joined: Jan 2008
Posts: 3
I am trying to switch a remote IP phone on an ESI IVX-X class system from extension 170 to 164. In ESI-Access, in F-31 I am trying to set up the extension. In F-821 the base UDP port is set to 59.

When I go into the UDP Port field and type 59, instead of populating the field with 164 it is populating it with 264 (giving me port 59264). I have already changed extension 170 to Local IP, in case it was a licensing issue. I am still unable to set the port properly.

Am I missing something? I do not have access to F-81 so I cannot determine if I am just having a licensing issue or something.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jul 2003
Posts: 766
SST Offline
Member
Member
Offline
Joined: Jul 2003
Posts: 766
I'm guessing because you said you are changing ext. #'s that x170 was working before you started. If this is the case leave f-821 as it was, this is a global setting for the IVC card. All you need to change is f-31, the phone, and ensure portforwarding for the new UDP. Remove the mac address form x170 and put it in x164 along with all of the other pertinant info for the extension in f-31. Then change the UDP in the phone using the standard method when on the same LAN as the IP-PBX or using esi-address if off-prem. Don't forget to port-forward the new UDP to the IVC card IP. That should do it.

The UDP port should be 59164. For some unknown esi-reason it gets populated as 592xx in the field, just change to 591xx.

Joined: Oct 2005
Posts: 3,124
Member
Member
Offline
Joined: Oct 2005
Posts: 3,124
Open Esi-Access, Highlight the system, Select EDIT at the top of the screen, Select Card/Slot Configuration. List your card types in order.

Card 1 ?
Card 2 ? and so on.............

You won't need to be actually connected to do this, info from your previous connection will suffice.

Joined: Oct 2005
Posts: 3,124
Member
Member
Offline
Joined: Oct 2005
Posts: 3,124
Also, are you sure your using Esi-Access or is it Esi-Admin?

Joined: Jan 2008
Posts: 3
Member
Member
Offline
Joined: Jan 2008
Posts: 3
SST: I did leave f-821 as it was, I was just pointing out the value I have for UDP. The problem is that I can;t change it to 59164. That field only allows two #s to be entered and then it adds the 264 and it cannot be overwritten. I did move the MAC address and put in all the other pertinent info.

grider: I am using ESI-Access.
Card Card Type
1 E2-D12
2 E2-D12
3 E2-D12
5 E2-684
6 IVC-5R

All in Cabinet 1. Do you need the Avail CO, Digital, & Analog or Port Ranges? That all seems to be related to internal not remote phones.

Joined: Oct 2005
Posts: 3,124
Member
Member
Offline
Joined: Oct 2005
Posts: 3,124
That indicates slot 4 to be empty, is that correct?

Joined: Nov 2004
Posts: 1,582
Likes: 1
Moderator-ESI - Executone
*****
Moderator-ESI - Executone
*****
Joined: Nov 2004
Posts: 1,582
Likes: 1
try going into the field for the UDP port, and just Highlite the last 3 digits and then type in the number you are trying to use.


I can see the light at the end of the tunnel..

Retirement 2019 ( It has happened )
Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
***
Moderator-ESI, Shoretel
***
Joined: Aug 2002
Posts: 2,608
Unless i am missing something in looking at the documents on the X Class you can't change the last 3 digits of the UDP ports - they are either 001 for the processor or the 3 digit extension #. On the new CS systems the last 3 can be changed. If you can't get it straightened out you may need to use tech support.

One last thought - have you tried programming this parameter using the phones versus the PC?

Joined: Jul 2003
Posts: 766
SST Offline
Member
Member
Offline
Joined: Jul 2003
Posts: 766
I was just in an e-class yesterday. I had no trouble changing UDP 59226 to 59126 in f-31.......sometimes the system sets the UDP ports as 592xx. I've seen this many times and just change it to 591xx....

Joined: Nov 2004
Posts: 1,582
Likes: 1
Moderator-ESI - Executone
*****
Moderator-ESI - Executone
*****
Joined: Nov 2004
Posts: 1,582
Likes: 1
Quote
Originally posted by upstateny:
Unless i am missing something in looking at the documents on the X Class you can't change the last 3 digits of the UDP ports - they are either 001 for the processor or the 3 digit extension #. On the new CS systems the last 3 can be changed. If you can't get it straightened out you may need to use tech support.

One last thought - have you tried programming this parameter using the phones versus the PC?
Well, If I could figure out how to post a screenshot, i could show you :rolleyes:


I can see the light at the end of the tunnel..

Retirement 2019 ( It has happened )
Page 1 of 2 1 2

Moderated by  5years&counting, nonameyet 

Link Copied to Clipboard
Newest Topics
NEC Aspire Analog Extensions
by teldata1 - 12/18/24 07:08 AM
Crack pwd on NS700?
by Toner - 12/17/24 01:45 PM
ds2000 issue
by jsaad - 12/17/24 10:11 AM
Forum Statistics
Forums84
Topics94,457
Posts639,629
Members49,824
Most Online5,661
May 23rd, 2018
Newest Members
Abdul Munna, Sandrino, micro, nurelion, FooF
49,824 Registered Users
Top Posters(30 Days)
Toner 11
jsaad 6
BrianS 3
dans 3
Who's Online Now
1 members (mongo5150), 262 guests, and 21 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2024
Powered by UBB.threads™ PHP Forum Software 8.0.0