|
|
Joined: Nov 2004
Posts: 524
Member
|
Member
Joined: Nov 2004
Posts: 524 |
No. Break out kits not needed. I'm sending you mail with part #s & Spec sheets.
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Nov 2004
Posts: 524
Member
|
Member
Joined: Nov 2004
Posts: 524 |
Clarification. Single mode is always laser. MM can be LED or Laser. MM laser & SM laser are not at all the same.
ElectSys Tech LLCHosted Phone Systems Solutions Provider Allworx, Sangoma, FreePBX Telephone & computer systems in the Jefferson City, Columbia MO area.
|
|
|
|
Joined: Mar 2005
Posts: 97
Member
|
Member
Joined: Mar 2005
Posts: 97 |
Aweaver is steering you straight. Indoor/outdoor tight buffer is probably your best way to go and the prices on it have gotten down to normal (pvc jacket) levels. It also allows you to surpass the 50 ft rule after you enter the building. Therefore no splice to be done to transition to indoor rated. I'd disagree to favoring 50 micron over 62.5, but that's just because almost everything in my area has been done w/62.5 micron.
Breakout/fanout kits aren't hard to install and use. Even with ickypic fills. Just remember to ALWAYS clean them well with Hydrosol wipes (minimum of 5 good swipes down the strands), wipe them down with clean Kimwipes, and then wipe them down with a new Kimwipe that is dusted with baby powder. They usually slip right in with minimal effort.
MM good for short runs (<2000 ft) SM good for the longer. MM very good to GB speed but if MGB is desired use the SM. They will be paying out the nose for the active equipment anyhow, don't bottleneck them w/inadequate fiber.
|
|
|
|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
I know this is an older post but: Gel filled is not fun. I've heard (but haven't tried) baby powder helps with the fan-out kit. Still takes a lot of cleaning.
About length/bandwith: for 62.5 MM is good for about 2KM at 100mb SM goes to about 30Km For gigabit: 220 meters over 62.5 m fiber and 550 meters over 50 m fiber
Bandwidth of fiber is MHz per kilometer. As the length of fiber increases the bandwidth decreases proportionally.
Short cable=higher bandwith
50 m cable offers about 3x bandwidth of 62.5
|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
Member
Joined: Mar 2004
Posts: 488 |
Use lotsa 90% pure isoproply alcohol,and lotsa wipes. Get your fibre very clean and use baby powder. Prep is very important.
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
197
guests, and
138
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|