|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
I have a system which took a power surge so I had to replace the cabinet. Now I get ver v2.2 2003 4.30 on the screen but I cannot do any programming. What can I do?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
With the replacement cabinet is ALL of the memory in the proper slot? what cards are in the system? are any of them from the old cab?
You may have a bad card or ram pack remove all cards and reboot. install one at a time and reboot until you find the bad component.
|
|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
I have a SVMI-4 card, a 4 COP card, a 2SLI card, a MISC2 card and a RAM2. I have tried the cards from the replacement cabinet as well.
|
|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
The only thing I can do is use the # key to see the following.
1. KEY&LED
2. Ring Test
3. Transmission
|
|
|
|
|
Joined: Dec 2007
Posts: 64
Member
|
|
Member
Joined: Dec 2007
Posts: 64 |
Try checking / replacing fuses on the power supply. We've had that many times and new fuses seem to do the trick.
|
|
|
|
|
Joined: May 2005
Posts: 391
Member
|
|
Member
Joined: May 2005
Posts: 391 |
The chips on the actual cabinet motherboard, how many are in there and what version does it say? Do you have Falcon phones or DCS phones? It could be that the software is too old to support the phones you have so the phones aren't coming up. The fact that it shows version means power is good.
www.A1Bizcom.com Specializing in selling and installing new and used Samsung systems
|
|
|
|
|
Joined: Nov 2005
Posts: 148
Member
|
|
Member
Joined: Nov 2005
Posts: 148 |
My experince is the 5 volts regulator is gone or
fuse is blown. Take a meter and read all the voltages
Dennis
Samsung Authorized Dealer, AVAYA reseller, One Communications Team Partner
|
|
|
|
|
Joined: Jan 2007
Posts: 197
Member
|
|
Member
Joined: Jan 2007
Posts: 197 |
SooprmanX and fone32 are both right.
The 2 possible causes of the fault are that the phones you have are not compatable with the software installed or, you have power supply issues.
|
|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
I changed all of the fuses. The phones are Idcs 18D. The software ver is v2.2. Thanks.
|
|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
I will read the voltages.
|
|
|
|
Forums84
Topics94,466
Posts639,686
Members49,828
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
