|
|
|
|
Joined: May 2005
Posts: 16
Member
|
|
Member
Joined: May 2005
Posts: 16 |
Brilliant!!!!! I don’t know what was wrong but after I powered down the system without the battery attached everything is working. I have tone and can make and receive calls - <font face="Verdana, Arial" size="2">Originally posted by chrislebeck:
yes s1 is the 1st non cpu & isa slot
the prom socket is just for software updates to the cpu and is not needed under normal use.
phones are system powered
pressing the reset button will just reset the system EXCEPT if the battery is disconnected from the cpu THEN it will default the system too.
no need for a co line to be installed. you should get intercom tone from the digital ports & analog ports after going off hook.
if the battery was dead or had been disconnected it would default the system (which is not a bad thing since you don't really know what was programmed in there).
you might try removing the battery from the cpu, power down the system, wait for a few seconds, then power it back up, plug the battery in. then see if things work</font>
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
|
Member
Joined: Nov 2003
Posts: 1,313 |
you'll probably still have to set up ringing (4-01/02), buttons (4-12) and so on. but at least it's working!
|
|
|
|
|
Joined: May 2005
Posts: 16
Member
|
|
Member
Joined: May 2005
Posts: 16 |
I was able to make a call out through the telco and back to the unit on a second line and it came through on the line i expected so some programming will be needed but it may be minimal - thanks again for what proved to be the winning idea!!! <font face="Verdana, Arial" size="2">Originally posted by chrislebeck:
you'll probably still have to set up ringing (4-01/02), buttons (4-12) and so on. but at least it's working!</font>
|
|
|
|
Forums84
Topics94,400
Posts639,348
Members49,807
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Si-14 LLC, Toner),
198
guests, and
184
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
