|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
I assume it is a single line machine which will hook into a co line, you should have mentioned it to the tech while he was there, it would warrant another service call as he will have to come out and set up a jack to share line 1.
Russ runs a local service and private tech center. [/url]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2006
Posts: 2,751 Likes: 18
Admin
|
Admin
Joined: Jul 2006
Posts: 2,751 Likes: 18 |
As well he'll have to make another service call. When did you bring out the answering machine, after he left???
This isn't a Ronco infomercial (but wait there's more). Your first "professional" screwed up if you had all of the equipment in place in that he didn't provide for the analog device. If it wasn't there, it must be your fault. At any rate, service techs can't read your mind, he came to reprogram the system and based on what you told him, did so. If you told him you had an answering machine and it didn't work, he would have made it work. Since you didn't he couldn't read your mind.
Work it out between the two, but plan on paying the second guy or the first.
Carl
This model is end of life
|
|
|
|
Joined: Sep 2007
Posts: 8
Member
|
Member
Joined: Sep 2007
Posts: 8 |
Thanks Carl. I needed to be beat up because I forgot to have them do my answering machine.
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
you might be able to get a trillium panther opx unit. converts key phone to slt for answering machines, cordless phones etc... will answer any line coming in,one at a time of course.
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Joined: Jul 2006
Posts: 2,751 Likes: 18
Admin
|
Admin
Joined: Jul 2006
Posts: 2,751 Likes: 18 |
Originally posted by bschelle: I found a REAL tech and he repaired all of the mistakes the other guy did and all is well. I went to hook up my digital answering machine and now it will not answer at all. Does it need a special extension or programing? I just had it plugged into a jack in my old office and it worked fine! I emailed the tech and asked him but I think he wants to make another office call to make the machine work. He has not responded to my email yet. Bill. Off the top of my head, there are two systems that allow you to plug a single line device into a key system port and have it function properly and the Panther isn't one of them :-) I'm not here to beat you up, but you pretty much said in this post that you plugged it into a jack in your old office and it worked fine. I know that all 6 position jacks look alike, but you can't plug a Panther phone into a jack at home and you can't plug an answering machine into a Panther jack. Yet you made it seem like it was a crime that the tech "wanted to make another service call". How do you propose he give you a single line jack tied to line 1 if he is in his office and you are in yours? If that's the worst beating you get in a week, be glad. Pay one of the guys their money or do it yourself and chalk it up to experience. I'm thinking that $30-50 spread out over the life of this system isn't a whole lot since the Panther has to be about 15 years old. Carl
This model is end of life
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
There is a opx available for the panther systems. and it is fine for the likes of a answering machine, cordless, or long line. this is a converter that plugs in to key port and gives out a slt port, it interfaces with the system as a key phone. the goldstar GSX series had one as well and it worked fine.
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Joined: Jul 2006
Posts: 2,751 Likes: 18
Admin
|
Admin
Joined: Jul 2006
Posts: 2,751 Likes: 18 |
Those OPX boxes you refer to for Panther are rare around here, but a search of the internet shows that maybe some are available.
I don't remember when Mitel discontinued the product(at least 15 years ago), but I have 4 systems in my customer base and I only installed two of them and they were used.
It the original poster had one, it probably go lost in the shuffle.
Carl
This model is end of life
|
|
|
|
Joined: Sep 2007
Posts: 8
Member
|
Member
Joined: Sep 2007
Posts: 8 |
Will I need a Trillium Tech to set up a jack to share line 1? Reason being the Trillium Tech is 60 miles away and hard to schedule.
|
|
|
|
Joined: Jul 2006
Posts: 2,751 Likes: 18
Admin
|
Admin
Joined: Jul 2006
Posts: 2,751 Likes: 18 |
If you're going with the answering machine plugged into line 1, no. Anyone who knows how to wire jacks can break out a pair at the location you specify and wire line 1 to it.
Carl, don't write back if he screws it up :-)
This model is end of life
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
Member
Joined: Mar 2001
Posts: 3,268 |
Where in Lake County are you? I know of a small company in Buffalo Grove that might help you out if it was just hooking up a jack to line 1 for an answering machine.
There's not too many people left that even know what a Trillium 1032 is--much less work on one and program it.
|
|
|
Forums84
Topics94,457
Posts639,629
Members49,824
|
Most Online5,661 May 23rd, 2018
|
|
1 members (morephones),
231
guests, and
52
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|