web statisticsweb stats

Business Phone Systems

Products from our Sponsors
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 4 1 2 3 4
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
There are some similar posts on cordless phones and the dialing of 911. In those posts, it was discussed that sometimes a noisy cable pair will cause the CO to default and cause a call to go to 911. Is the cross-connect securly connected from Cbyond to your CO port or could the Toshiba CO port be ptting noise on the line when idle? Of course, this would suggest that the calls could occur any time of day or night.


- Dave S. -

You can never appease your ideologue opponents.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Dec 2007
Posts: 2,033
Moderator-Toshiba
Moderator-Toshiba
Joined: Dec 2007
Posts: 2,033
Quote
Originally posted by MNDAVE:
There are some similar posts on cordless phones and the dialing of 911. In those posts, it was discussed that sometimes a noisy cable pair will cause the CO to default and cause a call to go to 911. Is the cross-connect securly connected from Cbyond to your CO port or could the Toshiba CO port be ptting noise on the line when idle? Of course, this would suggest that the calls could occur any time of day or night.
Dave, that sounds very logical.We had a CTX100 that phantom dialed on digital ports, because of RF interference. If that's the case, it shouldn't matter if the vm system is in or not... unless it is the source of interference.


- Tony
Ohio Data LLC
Phone systems, data networks, firewalls and servers in Central Ohio.
Some people aren't used to an environment where excellence is expected.
Joined: Jul 2006
Posts: 728
Member
Member
Joined: Jul 2006
Posts: 728
Did the dispatcher at least give you the Caller ID information? Some lines have individual caller id instead of a Site Id..

Joined: Jun 2007
Posts: 59
Member
Member
Offline
Joined: Jun 2007
Posts: 59
I installed the Aleen unit, and within 10 minutes the cops called again. I just pulled it out ans reinstalled the Flash since that obviously made no difference. Then I went to program *45 and set up 911 as a restricted digit code, and went to each phone and made sure 911 got a busy, which it did. It was Friday afternoon, so I will have to wait until Monday when they go back online to see if that worked. Interesting tidbit- the last 911 dispatcher said she could hear background chattering, as if a phone had called 911 itself and broadcast normal office talk, with no real caller on the line. Also, they only get 911 calls on the day greeting (991, greeting 1) and not the night message (greeting 2). I will let everyone know what happens Monday. Oh, the caller ID info from 911 was from any of their numbers, not a specific one.


Venture Teleservices
Joined: Mar 2001
Posts: 3,869
Member
****
Member
****
Joined: Mar 2001
Posts: 3,869
Why do you not install a SMDR and get a report?

As annoyed as the cops are, I would think it would be reasonable that you take my former and current suggestion.

You are spending a lot of time there and annoying the police and just so you can't bother to put in a SMDR card?


THE Bracha, old blond specialist in Rube Goldberg solutions.
Joined: Jun 2007
Posts: 59
Member
Member
Offline
Joined: Jun 2007
Posts: 59
Today I swapped out the DK40 for a DK280. I will know tomorrow if it solves the problem.


Venture Teleservices
Joined: Sep 2010
Posts: 2
Member
Member
Offline
Joined: Sep 2010
Posts: 2
I have had this problem. It was on 2 digit systems. Calls going to any station 10 -19 would dial 911 when the follow on ID code of 91 was used and a CO caller would hang up just while the call was being transferred back to VM on NA condition. I changed the "leave message" code to 93 and programmed #656 to 93 and had no more problems.


PhonemanRitter
Joined: Jun 2007
Posts: 59
Member
Member
Offline
Joined: Jun 2007
Posts: 59
Now you tell me. That sounds like a plausible explanation. But wouldn't that be a common problem on all DK40s that use the 91 ID code? What unique circumstance do you think triggered the issue on your system, but not on others?

No 911 calls today. I did change all the 3 digit extensions to two digit, so they could keep their same numbers, so I wonder if the same issue would apply here? I'm not sure whether to burn the old DK40 or just default it and use it somewhere else.


Venture Teleservices
Joined: Sep 2010
Posts: 2
Member
Member
Offline
Joined: Sep 2010
Posts: 2
Common on DK16, DK16e, DK40, & Dk40i when you are using 2 digit station numbers. The only other contributing factor I could think of is the disconnect signal (or lack of) from the CO.


PhonemanRitter
Joined: Jun 2007
Posts: 59
Member
Member
Offline
Joined: Jun 2007
Posts: 59
Where do you change the "leave message" code to 93?


Venture Teleservices
Page 3 of 4 1 2 3 4

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Newest Topics
NEC Aspire Analog Extensions
by teldata1 - 12/18/24 07:08 AM
Crack pwd on NS700?
by Toner - 12/17/24 01:45 PM
ds2000 issue
by jsaad - 12/17/24 10:11 AM
Forum Statistics
Forums84
Topics94,457
Posts639,629
Members49,824
Most Online5,661
May 23rd, 2018
Newest Members
Abdul Munna, Sandrino, micro, nurelion, FooF
49,824 Registered Users
Top Posters(30 Days)
Toner 11
jsaad 6
dans 3
BrianS 3
Who's Online Now
0 members (), 345 guests, and 50 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2024
Powered by UBB.threads™ PHP Forum Software 8.0.0